|
DashDAQ Series II Technical
Specs
|
Display |
4” COLOR TFT w/touch panel |
|
Resolution |
480 x 272 (QWVGA) w 24-bit color display |
|
System Processor |
240MHZ ARM9 |
|
Vehicle Bus Processor |
48MHZ ARM7 |
|
RAM |
64MB SDRAM |
|
Flash |
16MB Flash |
|
Memory Expansion |
MMC/SD Card 128MB to 4GB+ |
|
Device I/O |
touch-panel, ambient light sensor, 16-bit stereo
line-out, 1W speaker, USB device port, programmable button |
|
Vehicle I/O |
CAN, J1850VPW (GM Class 2), J1850PWM (Ford SCP),
ISO9141, KWP2000 |
|
Expansion I/O |
(2) USB Host Ports, (2) RS232 Ports, (2) 0-5V 10-bit
analog inputs |
|
Add-on sensors |
Blackline GPS (up to 20HZ), Innovate MTS Bus products,
0-5V Wideband O2 Sensors, NMEA GPS, USB 3-axis Accelerometer, USB
K-Type Thermocouple |
|
Parameters Available |
Over 2000. See Vehicle list
HERE and
accessory list
HERE |
|
Operating temperature |
-35 to 85C |
|
Operating voltage |
6 to 30V |
|
Current Draw |
200mA at 100% backlight |
|
Low Power Mode |
YES |
|
Dimensions |
4.6” x 2.75” x 1” |
|
Weight |
0.5LB |
|
Operating System |
Linux |
|
Warranty |
factory tested with 1 year warranty |
|
Other Features |
Real Time Clock, locking connectors, factory tested,
field upgradeable firmware |
|
Mounting Pattern |
AMPS 4-HOLE standard |
|
Package Contents |
DashDAQ, Vehicle Cable, USB Cable, Windshield Pedestal,
CD-ROM, users manual |
|
|
| |
|
