Contact us at 888-OBD-TUNE (888-623-8863)    

Hours: Mon-Thur 9AM to 6PM, Fri 9AM-5PM, Sat/Sun by Appointment Only     

1958 East Walnut Street    
Unit D     
Columbus, Ohio 43205    

Email: Sales@tunertools.com
 
  Shop ServicesBrandsSearchContact UsAboutSite MapPrivacyTermsCheckout              


Dealer Inquiry (dealers ONLY please)





Home » HaltechECU

 Checkout
Select Price RangeKeyWord

« Previous | 1 | 2 | »

Haltech Elite 1000  ECU Kit (Select Wiring Options)
Previous1 of 3Next
Product ID: HT-Elite-1000-15080x

Details 

Haltech Elite Series ECUs take the art of engine management to a brand new level. With a waterproof case, drive-by-wire, exhaust cam and knock control the Elite Series ECUs provide cutting edge technology to tuners and performance enthusiasts world-wide. Elite 1000 provides 4 independent injector and ignition outputs. This is simply an Elite 1500 without the Advanced Race Functions included. Includes Knock detection, boost control and more! No add-ins, all features enabled.
:
:
:
:
Price: $1,399.00

Haltech Elite 1500 ECU Kit (Select Wiring Options)
Previous1 of 3Next
Product ID: HT-Elite-1500-15090x

Details 

Haltech Elite Series ECUs take the art of engine management to a brand new level. With a waterproof case, drive-by-wire, exhaust cam and knock control the Elite Series ECUs provide cutting edge technology to tuners and performance enthusiasts world-wide. Elite 1500 provides 4 independent injector and ignition outputs. Includes Drive-by-wire support, Knock detection, boost control and more! No add-ins, all features enabled.
:
:
:
:
Price: $1,472.00

Haltech Elite 750 Miata Plug and Play Kit
Product ID: HT-Elite-150622-Miata_NA

Details 

Untitled 2

Haltech's Plug’n’Play Adaptor Harnesses allow you to use Haltech’s universal Elite ECUs by connecting them directly to the factory harness in your car via a Plug’n’Play adaptor. 
This is an ideal solution for builders and tuners who want a quick and easy install without the need to rewire the whole system.
Suits: Mazda MX-5 (Miata) 1.6L and 1.8L with 2 Plug, 2 Row ECU.
Suits: Mazda MX-5 (Miata) 1.6L and 1.8L with 2 Plug, 2 Row ECU.
Includes: Elite 750 ECU. Adaptor Harness. M14 x 1.5 Air Temp Sensor and plug and pins. Auxiliary I/O 16 Pin TYCO plug and pins.
Note: Does not support USDM OBDII MY96-97, Special Edition SE or Anniversary Models.

:
:
:
:
List Price: $1,800.00
Price: $1,519.00

Haltech Elite 950 with V8 Harness (Small Block/Big Block - GM, Ford Chrysler)
Previous1 of 2Next
Product ID: HT-Elite-150720

Details 

Part Number: HT-150720


Suits: Big Block/Small Block GM, Ford,  Chrysler with Bosch EV1 injector connectors.
Includes: Haltech Elite 950 ECU, Terminated Engine Harness, distributor/MSD ready ignition harness with three circuit fuse block. Waterproof USB cap, USB programming cable and Software CD.

The Elite 950 is a single connector ECU ideal for basic V8 engines and basic carburetor-to-EFI conversions. Suitable for either naturally aspirated or forced induction engines the Elite 950 is a powerful, compact ECU.

:
:
:
List Price: $1,699.00
Price: $1,699.00

Haltech Elite 950 LS Terminated Harness Kit (LS1/LS6, Gen III LS engines)
Previous1 of 2Next
Product ID: HT-Elite-150721

Details 

Part Number: HT-150721


Suits: GM Gen III LS1/LS6 (non DBW) with factory EV1 injector connectors.
Includes: Haltech Elite 950 ECU, Terminated Engine Harness, three circuit fuse block. Pre-wired to connect directly to OEM 7 pin coil harness connector. Waterproof USB cap, USB programming cable and Software CD.
Note: Ignition coils and harnesses are NOT included. Please order 8 x HT-020102 and/or HT-045657 if required.
:
:
:
Price: $1,699.00

Haltech Elite 950 w/ LS2/LS3 Harness (non-DBW)
Previous1 of 2Next
Product ID: HT-Elite-150722

Details 

Part Number: HT-150722


Suits: GM Gen IV LS2/LS3 etc (non DBW) with  Bosch EV1 injector connectors.
Includes: Haltech Elite 950 ECU, Terminated Engine Harness, three circuit fuse block. Pre-wired to connect directly to OEM 7 pin coil harness connector. Waterproof USB cap, USB programming cable and Software CD.
Note: Ignition coils and harnesses are NOT included.

:
:
:
Price: $1,749.00

Haltech Elite 1000 Plug And Play Eclipse 1G Turbo
Previous1 of 2Next
Product ID: HT-Elite-150831

Details 

Part Number: HT-1614
Suits: Mitsubishi Eclipse 1G Turbo (MY90-94)
Includes: Elite 1000 ECU, Plug’n’Play Adaptor, M14 x 1.5 air temp sensor, plug and pins.

Haltech Elite Series ECUs take the art of engine management to a brand new level. With a waterproof case, drive-by-wire, exhaust cam and knock control the Elite Series ECUs provide cutting edge technology to tuners and performance enthusiasts world-wide.

:
:
:
List Price: $1,614.00
Price: $1,614.00

Haltech Elite 1000 Mitsubishi 4G63 (1st Gen)
Previous1 of 2Next
Product ID: HT-Elite-150834

Details 

Part Number: HT-150834
WBC1 CAN O2 Wideband Controller ready. (Controller and sensor not included)
Suits: 1G CAS (Cam Angle Sensor) and Square Bosch EV1 injector connectors.
Includes: Elite 1000 ECU, Engine Harness with Fuse block kit and Flying lead ignition harness.

Haltech Elite Series ECUs take the art of engine management to a brand new level. With a waterproof case, drive-by-wire, exhaust cam and knock control the Elite Series ECUs provide cutting edge technology to tuners and performance enthusiasts world-wide.

:
:
:
List Price: $2,099.00
Price: $2,099.00

Haltech Elite 1000 Mitsubishi 4G63 (2nd Gen)
Previous1 of 2Next
Product ID: HT-Elite-150835

Details 

Part Number: HT-150835


WBC1 CAN O2 Wideband Controller ready. (Controller and sensor not included)
Suits: 2G CAS (Cam Angle Sensor) and Square Bosch EV1 injector connectors.
Includes: Elite 1000 ECU, Engine Harness with Fuse block kit and Flying lead ignition harness.
:
:
:
List Price: $2,099.00
Price: $2,099.00

Haltech Elite 1000 Mitsubishi 4G63 (1st Gen w/HPI Ignition Module)
Previous1 of 2Next
Product ID: HT-Elite-150836

Details 

Part Number: HT-150836
WBC1 CAN O2 Wideband Controller ready.
Suits: 1G CAS (Cam Angle Sensor) and Square Bosch EV1 injector connectors. (Controller and sensor not included)
Includes: Elite 1000 ECU, Engine Harness with Fuse block kit and pre-wired HPI4 15AMP 4CH Ignition Module and C.O.P. Ignition Harness.
:
:
:
List Price: $2,499.00
Price: $2,499.00

Haltech Elite 1000 Mitsubishi 4G63 (2nd Gen w/HPI Ignition Module)
Previous1 of 2Next
Product ID: HT-Elite-150837

Details 

Part Number: HT-150837
WBC1 CAN O2 Wideband Controller ready.
Suits: 2G CAS (Cam Angle Sensor) and Square Bosch EV1 injector connectors. (Controller and sensor not included)
Includes: Elite 1000 ECU, Engine Harness with Fuse block kit and pre-wired HPI4 15AMP 4CH Ignition Module and C.O.P. Ignition Harness.

Haltech Elite Series ECUs take the art of engine management to a brand new level. With a waterproof case, drive-by-wire, exhaust cam and knock control the Elite Series ECUs provide cutting edge technology to tuners and performance enthusiasts world-wide.

:
:
:
List Price: $2,499.00
Price: $2,499.00

Haltech Elite 1000 Mitsubishi 4G63 (1st Gen w/CDI C.O.P Ignition Harness)
Previous1 of 2Next
Product ID: HT-Elite-150838

Details 

Part Number: HT-150838

WBC1 CAN O2 Wideband Controller ready.


Suits: 1G CAS (Cam Angle Sensor) and Square Bosch EV1 injector connectors. (Controller and sensor not included)
Includes: Elite 1000 ECU, Engine Harness with Fuse block kit and pre-wired Power Select 4 CDI - Dual Power Output 115mJ/150mJ CDI and C.O.P Ignition Harness.

Haltech Elite Series ECUs take the art of engine management to a brand new level. With a waterproof case, drive-by-wire, exhaust cam and knock control the Elite Series ECUs provide cutting edge technology to tuners and performance enthusiasts world-wide.

:
:
:
List Price: $2,977.00
Price: $2,977.00

Haltech Elite 1000 Mitsubishi 4G63 (2nd Gen w/CDI C.O.P Ignition Harness)
Previous1 of 2Next
Product ID: HT-Elite-150839

Details 

Part Number: HT-150839

WBC1 CAN O2 Wideband Controller ready.


Suits: 2G CAS (Cam Angle Sensor) and Square Bosch EV1 injector connectors. (Controller and sensor not included)
Includes: Elite 1000 ECU, Engine Harness with Fuse block kit and pre-wired Power Select 4 CDI - Dual Power Output 115mJ/150mJ CDI and C.O.P Ignition Harness.

Haltech Elite Series ECUs take the art of engine management to a brand new level. With a waterproof case, drive-by-wire, exhaust cam and knock control the Elite Series ECUs provide cutting edge technology to tuners and performance enthusiasts world-wide.

:
:
:
List Price: $2,977.00
Price: $2,977.00

Haltech Elite 1500 Plug And Play Eclipse 2G Turbo
Previous1 of 2Next
Product ID: HT-Elite-150937

Details 

Part Number: HT-150937
Suits: Mitsubishi Eclipse 2G Turbo
Includes: Elite 1500 (with Race Functions) ECU, Plug’n’Play Adaptor, M14 x 1.5 air temp sensor, plug and pins.
:
:
:
List Price: $1,800.00
Price: $1,800.00

Haltech Elite 1500 Plug And Play Eclipse 1G Turbo
Previous1 of 2Next
Product ID: HT-Elite-150942

Details 

Part Number: HT-150942
Suits: Mitsubishi Eclipse 1G Turbo (MY90-94)
Includes: Elite 1500 (with Race Functions) ECU, Plug’n’Play Adaptor, M14 x 1.5 air temp sensor, plug and pins.

Haltech Elite Series ECUs take the art of engine management to a brand new level. With a waterproof case, drive-by-wire, exhaust cam and knock control the Elite Series ECUs provide cutting edge technology to tuners and performance enthusiasts world-wide.

Haltech Elite Series ECUs take the art of engine management to a brand new level. With a waterproof case, drive-by-wire, exhaust cam and knock control the Elite Series ECUs provide cutting edge technology to tuners and performance enthusiasts world-wide.

:
:
:
List Price: $1,800.00
Price: $1,800.00

Haltech Elite 2000 LS Terminated Harness Kit (Gen III LS engines)
Previous1 of 3Next
Product ID: HT-Elite-151260-LS_GenIII

Details 

Untitled 2

Simplify your LS install with Haltech's Terminated harness! Elite ECU and a plug and play harness ready to LS swap anything and everything!

LS Swap the world!

 Includes Elite 200 ECU and Terminated harness for Gen III based engines (LS1/LS6, 5.3/6.0 Vortec LM7/LQ4/LQ9) Ignition Coil and sub-harness no included.

:
:
:
Price: $2,275.00

Haltech Elite 2500 ECU Kit (Select Wiring Options)
Previous1 of 2Next
Product ID: HT-Elite-15130X

Details 

Haltech Elite Series ECUs take the art of engine management to a brand new level. With a waterproof case, drive-by-wire, exhaust cam and knock control the Elite Series ECUs provide cutting edge technology to tuners and performance enthusiasts world-wide. Elite 2500 provides 8 independent injector and ignition outputs for control on almost any engine!
:
:
:
:
Price: $1,947.00

Haltech Elite 2000 ECU Kit (Select Wiring Options)
Previous1 of 3Next
Product ID: HT-Elite-2000-15120x

Details 

Haltech Elite Series ECUs take the art of engine management to a brand new level. With a waterproof case, drive-by-wire, exhaust cam and knock control the Elite Series ECUs provide cutting edge technology to tuners and performance enthusiasts world-wide. Elite 1000 provides 4 independent injector and ignition outputs. This is simply an Elite 2500 without the Advanced Race Functions included. Includes Knock detection, boost control and more! No add-ins, all features enabled.
:
:
:
:
Price: $1,567.00

Haltech Elite 550 (SelectWiring Options)
Previous1 of 3Next
Product ID: HT-Elite-550-15040x

Details 

The Elite 550 is ideal for basic 4 to 8 cylinder or 1-2 rotor engine applications. This robust, competitively priced ECU features an environmentally sealed, waterproof case, 4 fuel and ignition channels and a 3 BAR internal MAP sensor.

The Elite 550 ECU is powered by the Elite Software Programmer (ESP) - a powerful yet intuitive software that brings with it levels of functionality and ease of use never seen before in an engine control package.

:
:
:
:
List Price: $849.00
Price: $807.00

Haltech Elite 750 (SelectWiring Options)
Product ID: HT-Elite-750-15060X

Details 

Untitled 2

The Elite 750 ECU is powered by the Elite Software Programmer (ESP) - a powerful yet intuitive software that brings with it levels of functionality and ease of use never seen before in an engine control package.

(Multiple wiring harness options availble - please select your options)

Engine Suitability:
- 1 to 8 cylinder engines or 1 to 3 rotor engines
- Normally aspirated or forced induction

:
:
:
:
List Price: $1,199.00
Price: $1,139.00

« Previous | 1 | 2 | »


   

Products Available at www.TunerTools.com

2014 Chevy/GMC Duramax is tuned!  +81 HP & +170 ft/lb of torque!

Jeep Wrangler JK 3.6L 2012-2014 is now tuned!

Harley Davidson Tuner!
The Vigilante

Autoland Scientech
Diagnosis Online Solutions
"DOL"
Now Available!

Toyota Tundra Tuning!
Tacoma, Sequoia, & 4Runner
Up to 30 HP!

LC-1 Wideband Clearance Sale!  $147.50

2013 Dodge, Chrysler, & Jeep 3.6L, 5.7L & 6.4L Tuned!

Diablosport has tuned the 2014 Camaro SS!


Tuner Tools Facebook PageTuner Tools on TwitterTuner Tools on Linked In
Tuner Tools LLC
888 OBD TUNE
Contact Us

 

 

 

 

home - site map - search - brands - about us - contact - privacy - terms of service - cart

Tuner Tools Affiliates: Access your account here
Copyright 2006-2016 Tuner Tools LLC - All Rights Reserved Worldwide