Contact us at 888-OBD-TUNE (888-623-8863)    

Hours: Mon-Thur 9AM to 6PM, Fri 9AM-5PM, Sat/Sun by Appointment Only     

1958 East Walnut Street    
Unit D     
Columbus, Ohio 43205    

Email: Sales@tunertools.com
 
  Shop ServicesBrandsSearchContact UsAboutSite MapPrivacyTermsCheckout              


Dealer Inquiry (dealers ONLY please)





Home » StandaloneEcu

 Checkout
Select ManufactuerSelect Price RangeKeyWord

« Previous | 1 | 2 | 3 | »

Haltech Elite 1500 Plug And Play Eclipse 2G Turbo
Previous1 of 2Next
Product ID: HT-Elite-150937

Details 

Part Number: HT-150937
Suits: Mitsubishi Eclipse 2G Turbo
Includes: Elite 1500 (with Race Functions) ECU, Plug’n’Play Adaptor, M14 x 1.5 air temp sensor, plug and pins.
:
:
:
List Price: $1,800.00
Price: $1,800.00

Haltech Elite 1500 Plug And Play Eclipse 1G Turbo
Previous1 of 2Next
Product ID: HT-Elite-150942

Details 

Part Number: HT-150942
Suits: Mitsubishi Eclipse 1G Turbo (MY90-94)
Includes: Elite 1500 (with Race Functions) ECU, Plug’n’Play Adaptor, M14 x 1.5 air temp sensor, plug and pins.

Haltech Elite Series ECUs take the art of engine management to a brand new level. With a waterproof case, drive-by-wire, exhaust cam and knock control the Elite Series ECUs provide cutting edge technology to tuners and performance enthusiasts world-wide.

Haltech Elite Series ECUs take the art of engine management to a brand new level. With a waterproof case, drive-by-wire, exhaust cam and knock control the Elite Series ECUs provide cutting edge technology to tuners and performance enthusiasts world-wide.

:
:
:
List Price: $1,800.00
Price: $1,800.00

Haltech Elite 2000 LS Terminated Harness Kit (Gen III LS engines)
Previous1 of 3Next
Product ID: HT-Elite-151260-LS_GenIII

Details 

Untitled 2

Simplify your LS install with Haltech's Terminated harness! Elite ECU and a plug and play harness ready to LS swap anything and everything!

LS Swap the world!

 Includes Elite 200 ECU and Terminated harness for Gen III based engines (LS1/LS6, 5.3/6.0 Vortec LM7/LQ4/LQ9) Ignition Coil and sub-harness no included.

:
:
:
Price: $2,275.00

Haltech Elite 2500 ECU Kit (Select Wiring Options)
Previous1 of 2Next
Product ID: HT-Elite-15130X

Details 

Haltech Elite Series ECUs take the art of engine management to a brand new level. With a waterproof case, drive-by-wire, exhaust cam and knock control the Elite Series ECUs provide cutting edge technology to tuners and performance enthusiasts world-wide. Elite 2500 provides 8 independent injector and ignition outputs for control on almost any engine!
:
:
:
:
Price: $1,947.00

Haltech Elite 2000 ECU Kit (Select Wiring Options)
Previous1 of 3Next
Product ID: HT-Elite-2000-15120x

Details 

Haltech Elite Series ECUs take the art of engine management to a brand new level. With a waterproof case, drive-by-wire, exhaust cam and knock control the Elite Series ECUs provide cutting edge technology to tuners and performance enthusiasts world-wide. Elite 1000 provides 4 independent injector and ignition outputs. This is simply an Elite 2500 without the Advanced Race Functions included. Includes Knock detection, boost control and more! No add-ins, all features enabled.
:
:
:
:
Price: $1,567.00

Haltech Elite 550 (SelectWiring Options)
Previous1 of 3Next
Product ID: HT-Elite-550-15040x

Details 

The Elite 550 is ideal for basic 4 to 8 cylinder or 1-2 rotor engine applications. This robust, competitively priced ECU features an environmentally sealed, waterproof case, 4 fuel and ignition channels and a 3 BAR internal MAP sensor.

The Elite 550 ECU is powered by the Elite Software Programmer (ESP) - a powerful yet intuitive software that brings with it levels of functionality and ease of use never seen before in an engine control package.

:
:
:
:
List Price: $849.00
Price: $807.00

Haltech Elite 750 (SelectWiring Options)
Product ID: HT-Elite-750-15060X

Details 

Untitled 2

The Elite 750 ECU is powered by the Elite Software Programmer (ESP) - a powerful yet intuitive software that brings with it levels of functionality and ease of use never seen before in an engine control package.

(Multiple wiring harness options availble - please select your options)

Engine Suitability:
- 1 to 8 cylinder engines or 1 to 3 rotor engines
- Normally aspirated or forced induction

:
:
:
:
List Price: $1,199.00
Price: $1,139.00

Haltech Elite 950 (SelectWiring Options)
Previous1 of 3Next
Product ID: HT-Elite-950-15070X

Details 

Elite 950

The Elite 950 is a single connector ECU ideal for basic V8 engines and basic carburetor-to-EFI conversions. Suitable for either naturally aspirated or forced induction engines the Elite 950 is a powerful, compact ECU.

:
:
:
:
List Price: $1,199.00
Price: $1,199.00

Link Atom G4+ ECU
Product ID: Link-Atom

Details 

The Atom now comes in a brand new enclosure, beautifully crafted from glass filled nylon. The stylish new enclosure is designed to IP67 standards, making it dust and waterproof. Running on the proven Link G4+ platform and being completely waterproof, Link are redefining what an entry level ECU should be. The Atom is ideal for naturally aspirated engines with 4 cylinders or less that just need a repower and don’t need all the extra sensors and features that come with our higher level ECUs. The same mounting technology as our higher level ECUsA fully extruded mounting plate is included Mounting hardware is completely hidden for a fully professional installation Waterproof automotive plugsThe same tuning features as our high-end ECUs - tuning is not compromised in this "entry level" ECU Full configurability, no preset input/outputsLogging, even closed loop fuel and knock if external devices are added (WideBand Controller & G4 KnockBlock)Industry standard waterproof connectors, mounting bracket and loom, all supplied with your G4 AtomSpec overview:Four injection drives, Four ignition outputs, Three analog inputs (you choose, oil pressure etc.)Two temperature inputs (usually water and inlet air temperature)Two digital inputs (e.g. vehicle speed and logging switch - you choose)Four auxiliary outputs (e.g. fuel pump, fans, boost control, O2 heater etc.) *One, thirty four pin, waterproof connector5V out
:
:
:
List Price: $815.45
Price: $650.00

Link Fury G4+ ECU
Product ID: Link-Fury

Details 

If it is Onboard Digital Wideband you are after, then the Fury is the ECU for you. Like the Xtreme, the Fury offers all the features you have come to expect from one of Link’s world leading premium ECU’s, but with Digital wideband. The Fury is optimised for engines with 6 cylinders or less and 3 Rotor engines. If you want to gain an advantage over the competition, you’ll want a premium ECU like the Fury.
:
:
:
:
List Price: $1,530.00
Price: $1,530.00

Link Monsoon G4+ ECU
Product ID: Link-Monsoon

Details 

If you like the value of the Atom, but are looking for a couple of extra features, then the Monsoon is the ECU for you. With the Monsoon you have all the repower capabilities of the Atom, but you can also choose to run some of the following features: Gearshift Control, Launch Control, Anti-lag, VVT Control and Closed Loop Boost Control. Note: The Monsoon will run any of the above features, but it cannot run them all at once. The amount of features you can run is dependent on how many of the limited Inputs and Outputs each feature needs. The Monsoon is ideal for engines with 4 cylinders or less that just need a repower and one or two features, so you don’t need to make the jump up to one of our higher level ECUs.
:
:
:
List Price: $875.00
Price: $875.00

Link MX5/Miata Plug and Play ECU
Product ID: Link-MX5Link

Details 

Free yourself from the constraints of the Factory ECU! The Link G4+ MX5Link MX5+ PlugIn fits the Mazda MX5 1600-1800 (NA models) and the GTX/R (1800cc). The ECU PCB fits discretely inside the original factory enclosure.
:
:
List Price: $815.45
Price: $800.00

Link G4+ PlugIn ECU Modules
Product ID: Link-PlugIn

Details 

Free yourself from the constraints of the factory ECU. The Link G4+ Plug-In fits discretely inside the original enclosure. Installation is a breeze with no alteration of the factory wiring loom required. A built-in connector (or pins in some models) provides additional inputs and outputs such as oil pressure inputs or anti-lag / logging switches (the number available depends on the application) Pricing Varies by application: SPECIAL ORDER ONLY!
:
:
:
List Price: $1,524.38
Price: $1,524.38

Link Storm G4+ ECU
Product ID: Link-Storm

Details 

If it is value for money you are after, the Storm is the ECU for you. The Storm offers most of the advanced G4+ tuning features, at an extremely competitive price. The Storm has more inputs (digital and analogue), as well as more outputs than the Atom, and runs more features like Knock Control, VVT Control, Launch Control and Anti-lag. The Storm is optimised for naturally aspirated engines with 6 cylinders or less that only need some of the extra sensors and features that come with our higher level ECUs. Hardware Four saturated injection drives, four ignition outputs, four analog volt inputs, four digital inputs, eight auxiliary outputs* Two temperature inputs One, thirty four pin, waterproof connector On board map, knock input (optional upgrade) CAN / RS232 port Software - PCLink Fast tuning with keyboard driven commands Six hundred pages of help on "right-click" Powerful logging analysis built into PCLink Tabbed, user configurable layout
:
:
:
:
List Price: $1,316.64
Price: $1,200.00

Link Thunder G4+ ECU
Product ID: Link-Thunder

Details 

G4+ THUNDER ECU The Thunder is our biggest, most advanced ECU yet. The Thunder is optimised for high end applications requiring maximum performance, flexibility and tuning control. The Thunder has more inputs, more outputs and more features than any other Link ECU. The Thunder isn’t just serious about performance, it’s obsessed.
:
:
:
:
List Price: $1,895.00
Price: $1,895.00

Link Xtreme G4+ ECU
Product ID: Link-Xtreme

Details 

The Xtreme is one of Link’s premium ECU’s with more inputs and outputs, Peak and Hold Injection, built in E-throttle and all the motorsport features including Anti-lag and Traction Control. The Xtreme is optimised for all engines including V8s, 4 Rotors and turbos. If you want to gain an advantage over the competition, you’ll want a premium ECU like the Xtreme.
:
:
:
:
List Price: $1,350.00
Price: $1,350.00

MoTeC M600 ECU
Product ID: MT-M600

Details 

NOTE! Special Order! NO refunds/returns or exchanges!!! Built with the same leading edge technology as MoTeC's M800, the M600 is ideal for late model six cylinder engines and twin or triple rotary engines. It controls modern electronics such as continuously variable camshaft timing and drive by wire throttle and is fully programmable for road and race applications. It is both suited to stand-alone installation and as part of a complete engine management and data acquisition solution.
List Price: $3,875.00
Price: $2,550.00

MoTeC M800 WRX 99-08 PlugIn ECU
Product ID: MT-M800-WRX

Details 

MoTeC M800 Plug-In ECUs are fully programmable, direct replacements for factory ECUs on a select number of popular vehicle models. Based on the M800, they control the latest automotive advances such as continuously variable camshaft timing and drive by wire throttle. Complete with an OEM connector, M800 Plug-Ins are convenient and cost effective to install because they eliminate the need to rewire the vehicle. They simply plug into the factory wiring harness using the original sensors, ignition modules and fuel system. The units are built to operate with saturated drive fuel injectors.
Price: $3,499.00

MoTeC M800 ECU (includes advanced Features)
Product ID: MT-M820

Details 

MoTeC's benchmark M800 is a versatile, race-bred ECU that is suitable for almost any application including modern engines with up to 12 cylinders. It also suits rotary engines with twin, triple or quad rotors. NOTE! Special Order! NO refunds/returns or exchanges! It offers maximum sophistication to control the latest automotive advances, such as continuously variable camshaft timing and drive by wire throttle, while maintaining the flexibility to suit a range of users. This highly advanced ECU is ideal for professional motorsport and integrates seamlessly into a complete engine management and data acquisition solution.
Price: $4,917.00

MoTeC M84 ECU
Product ID: MT-M84

Details 

The M84 is a versatile, race-bred ECU that is suitable for a broad range of high performance applications, including engines with up to 8 cylinders. It also suits rotary engines with twin, triple or quad rotors. This new, entry level ECU is based on the advanced technology in MoTeC's benchmark M800, with a package of features to suit more moderate system requirements. It includes on-board Wideband Lambda plus 512 kB of data logging memory as standard. Now with Nitrous Injection and 100 Hz max logging rate. Install it as a stand-alone ECU or as part of a complete motorsport-ready engine management and data acquisition solution.
Price: $2,725.00

« Previous | 1 | 2 | 3 | »


   

Products Available at www.TunerTools.com

2014 Chevy/GMC Duramax is tuned!  +81 HP & +170 ft/lb of torque!

Jeep Wrangler JK 3.6L 2012-2014 is now tuned!

Harley Davidson Tuner!
The Vigilante

Autoland Scientech
Diagnosis Online Solutions
"DOL"
Now Available!

Toyota Tundra Tuning!
Tacoma, Sequoia, & 4Runner
Up to 30 HP!

LC-1 Wideband Clearance Sale!  $147.50

2013 Dodge, Chrysler, & Jeep 3.6L, 5.7L & 6.4L Tuned!

Diablosport has tuned the 2014 Camaro SS!


Tuner Tools Facebook PageTuner Tools on TwitterTuner Tools on Linked In
Tuner Tools LLC
888 OBD TUNE
Contact Us

 

 

 

 

home - site map - search - brands - about us - contact - privacy - terms of service - cart

Tuner Tools Affiliates: Access your account here
Copyright 2006-2016 Tuner Tools LLC - All Rights Reserved Worldwide