Checkout Via PayPal -  or your Visa, Discover or Mastercard!  Protected by PayPal




Contact us at 888-OBD-TUNE (888-623-8863)    

Hours: Mon-Thur 9AM to 6PM, Fri 9AM-5PM, Sat/Sun by Appointment Only     


Email: Sales@tunertools.com
 
  Shop ServicesBrandsSearchContact UsAboutSite MapPrivacyTermsCheckout              


Dealer Inquiry (dealers ONLY please)





Home » StandalonePnP

 Checkout
Select Price RangeKeyWord

« Previous | 1 | 2 | »

AEM Infinity-10 for 03-06 Nissan 350Z/Infiniti G35 M/T - CAN Enabled
Product ID: AEM-30-7107

Details 

The Infinity Plug & Play programmable ECU for the manual transmission 2003-'06 Nissan 350Z/Infiniti G35 (Infinity-8 PN 30-7110 and Infinity-10 PN 30-7107) includes an application-specific start-up calibration and connects via a Plug & Play harness (sold separately, PN 30-3520) that is designed to fit in the factory location (requires AEM bracket on G35 models, PN 30-5936). Begin by determining which Infinity ECU will best support the ancillary components in your manual transmission Nissan 350Z/G35 using the Infinity Specifications Chart (see "Specs" tab). The M/T 03-06 Nissan 350Z/G35 Plug & Play Infinity ECUs have unique part numbers and include several unique features that incorporate the Nissan factory electronics system (see "Features" tab). Complete Stand Alone Engine Control The Infinity ECU combines with the Plug & Play harness to replace the 350Z/G35's factory ECU. It controls all of the engine functions including up to four cam variable cam control (VQ35DE-RU) and the Drive by Wire (DBW) system. An AEM MAP sensor (sold separately) is required for proper operation of the Infinity ECU on this application. Plug & Play Harness with Expansion Port AEM's sealed, weatherproof Plug & Play harness (sold separately) includes dual Lambda connectors, an AEMnet connector for communication with other AEMnet enabled devices and an auxiliary connector with a Deutsch DTM 12P connector for adding common aftermarket sensors. Visit the "Features" tab for more information about the 350Z/G35 Infinity Plug & Play harness expansion port.
:
:
Price: $3,049.37

ECU Masters EMU Classic 1JZ PnP kit (JZA70)
Previous1 of 2Next
Product ID: EMU-JZA70-Classic

Details 

ECUMASTER EMU Plug and Play for the JZA70 1JZGTE is a complete plug-in standalone ECU for 1991-92 Toyota Supras with the 1JZGTE and manual transmission, as well as the JZX81 Toyota Chaser with a manual transmission. Includes ECU + PnP adapter (Base Maps available to download to get you started!) (or remove the ECU for just the patch harness at $175)
:
Price: $1,074.00

ECU Masters EMU Classic 2JZ Non VVTI PnP kit (JZA80)
Previous1 of 2Next
Product ID: EMU-JZA80-Classic

Details 

This ECUMASTER EMU Plug and Play kit is a complete plug-in standalone ECU for 2JZ Non VVTI (JZA80) connector and manual transmission, as well as the JZX81 Toyota Chaser with a manual transmission. Includes ECU + PnP adapter (Base Maps available to download to get you started!) (or remove the ECU for just the patch harness at $275)
Price: $1,174.00

ECU Masters EMU Classic 1JZ PnP kit (JZZ30)
Previous1 of 2Next
Product ID: EMU-JZZ30-Classic

Details 

ECUMASTER EMU Plug and Play for the JZZ30 (4 rows of pins on the ECU connector)  is a complete plug-in standalone ECU for 1JZGTE JZZ30 w/ 4 rows of pins on the ECU connector and manual transmission, as well as the JZX81 Toyota Chaser with a manual transmission. Includes ECU + PnP adapter (Base Maps available to download to get you started!) (or remove the ECU for just the patch harness at $250)
Price: $1,149.00

Haltech Elite 950 with V8 Harness (Small Block/Big Block - GM, Ford Chrysler)
Previous1 of 2Next
Product ID: HT-Elite-150720

Details 

Part Number: HT-150720


Suits: Big Block/Small Block GM, Ford,  Chrysler with Bosch EV1 injector connectors.
Includes: Haltech Elite 950 ECU, Terminated Engine Harness, distributor/MSD ready ignition harness with three circuit fuse block. Waterproof USB cap, USB programming cable and Software CD.

The Elite 950 is a single connector ECU ideal for basic V8 engines and basic carburetor-to-EFI conversions. Suitable for either naturally aspirated or forced induction engines the Elite 950 is a powerful, compact ECU.

:
:
:
List Price: $1,699.00
Price: $1,699.00

Haltech Elite 950 LS Terminated Harness Kit (LS1/LS6, Gen III LS engines)
Previous1 of 2Next
Product ID: HT-Elite-150721

Details 

Part Number: HT-150721


Suits: GM Gen III LS1/LS6 (non DBW) with factory EV1 injector connectors.
Includes: Haltech Elite 950 ECU, Terminated Engine Harness, three circuit fuse block. Pre-wired to connect directly to OEM 7 pin coil harness connector. Waterproof USB cap, USB programming cable and Software CD.
Note: Ignition coils and harnesses are NOT included. Please order 8 x HT-020102 and/or HT-045657 if required.
:
:
:
Price: $1,699.00

Haltech Elite 950 w/ LS2/LS3 Harness (non-DBW)
Previous1 of 2Next
Product ID: HT-Elite-150722

Details 

Part Number: HT-150722


Suits: GM Gen IV LS2/LS3 etc (non DBW) with  Bosch EV1 injector connectors.
Includes: Haltech Elite 950 ECU, Terminated Engine Harness, three circuit fuse block. Pre-wired to connect directly to OEM 7 pin coil harness connector. Waterproof USB cap, USB programming cable and Software CD.
Note: Ignition coils and harnesses are NOT included.

:
:
:
Price: $1,749.00

Haltech Elite 1000 Plug And Play Eclipse 1G Turbo
Previous1 of 2Next
Product ID: HT-Elite-150831

Details 

Part Number: HT-1614
Suits: Mitsubishi Eclipse 1G Turbo (MY90-94)
Includes: Elite 1000 ECU, Plug’n’Play Adaptor, M14 x 1.5 air temp sensor, plug and pins.

Haltech Elite Series ECUs take the art of engine management to a brand new level. With a waterproof case, drive-by-wire, exhaust cam and knock control the Elite Series ECUs provide cutting edge technology to tuners and performance enthusiasts world-wide.

:
:
:
List Price: $1,614.00
Price: $1,614.00

Haltech Elite 1000 Mitsubishi 4G63 (1st Gen)
Previous1 of 2Next
Product ID: HT-Elite-150834

Details 

Part Number: HT-150834
WBC1 CAN O2 Wideband Controller ready. (Controller and sensor not included)
Suits: 1G CAS (Cam Angle Sensor) and Square Bosch EV1 injector connectors.
Includes: Elite 1000 ECU, Engine Harness with Fuse block kit and Flying lead ignition harness.

Haltech Elite Series ECUs take the art of engine management to a brand new level. With a waterproof case, drive-by-wire, exhaust cam and knock control the Elite Series ECUs provide cutting edge technology to tuners and performance enthusiasts world-wide.

:
:
:
List Price: $2,099.00
Price: $2,099.00

Haltech Elite 1000 Mitsubishi 4G63 (2nd Gen)
Previous1 of 2Next
Product ID: HT-Elite-150835

Details 

Part Number: HT-150835


WBC1 CAN O2 Wideband Controller ready. (Controller and sensor not included)
Suits: 2G CAS (Cam Angle Sensor) and Square Bosch EV1 injector connectors.
Includes: Elite 1000 ECU, Engine Harness with Fuse block kit and Flying lead ignition harness.
:
:
:
List Price: $2,099.00
Price: $2,099.00

Haltech Elite 1000 Mitsubishi 4G63 (1st Gen w/HPI Ignition Module)
Previous1 of 2Next
Product ID: HT-Elite-150836

Details 

Part Number: HT-150836
WBC1 CAN O2 Wideband Controller ready.
Suits: 1G CAS (Cam Angle Sensor) and Square Bosch EV1 injector connectors. (Controller and sensor not included)
Includes: Elite 1000 ECU, Engine Harness with Fuse block kit and pre-wired HPI4 15AMP 4CH Ignition Module and C.O.P. Ignition Harness.
:
:
:
List Price: $2,499.00
Price: $2,449.00

Haltech Elite 1000 Mitsubishi 4G63 (2nd Gen w/HPI Ignition Module)
Previous1 of 2Next
Product ID: HT-Elite-150837

Details 

Part Number: HT-150837
WBC1 CAN O2 Wideband Controller ready.
Suits: 2G CAS (Cam Angle Sensor) and Square Bosch EV1 injector connectors. (Controller and sensor not included)
Includes: Elite 1000 ECU, Engine Harness with Fuse block kit and pre-wired HPI4 15AMP 4CH Ignition Module and C.O.P. Ignition Harness.

Haltech Elite Series ECUs take the art of engine management to a brand new level. With a waterproof case, drive-by-wire, exhaust cam and knock control the Elite Series ECUs provide cutting edge technology to tuners and performance enthusiasts world-wide.

:
:
:
List Price: $2,499.00
Price: $2,449.00

Haltech Elite 1000 Mitsubishi 4G63 (1st Gen w/CDI C.O.P Ignition Harness)
Previous1 of 2Next
Product ID: HT-Elite-150838

Details 

Part Number: HT-150838

WBC1 CAN O2 Wideband Controller ready.


Suits: 1G CAS (Cam Angle Sensor) and Square Bosch EV1 injector connectors. (Controller and sensor not included)
Includes: Elite 1000 ECU, Engine Harness with Fuse block kit and pre-wired Power Select 4 CDI - Dual Power Output 115mJ/150mJ CDI and C.O.P Ignition Harness.

Haltech Elite Series ECUs take the art of engine management to a brand new level. With a waterproof case, drive-by-wire, exhaust cam and knock control the Elite Series ECUs provide cutting edge technology to tuners and performance enthusiasts world-wide.

:
:
:
List Price: $2,977.00
Price: $2,977.00

Haltech Elite 1000 Mitsubishi 4G63 (2nd Gen w/CDI C.O.P Ignition Harness)
Previous1 of 2Next
Product ID: HT-Elite-150839

Details 

Part Number: HT-150839

WBC1 CAN O2 Wideband Controller ready.


Suits: 2G CAS (Cam Angle Sensor) and Square Bosch EV1 injector connectors. (Controller and sensor not included)
Includes: Elite 1000 ECU, Engine Harness with Fuse block kit and pre-wired Power Select 4 CDI - Dual Power Output 115mJ/150mJ CDI and C.O.P Ignition Harness.

Haltech Elite Series ECUs take the art of engine management to a brand new level. With a waterproof case, drive-by-wire, exhaust cam and knock control the Elite Series ECUs provide cutting edge technology to tuners and performance enthusiasts world-wide.

:
:
:
List Price: $2,977.00
Price: $2,977.00

Haltech Elite 1500 Plug And Play Eclipse 2G Turbo
Previous1 of 2Next
Product ID: HT-Elite-150937

Details 

Part Number: HT-150937
Suits: Mitsubishi Eclipse 2G Turbo
Includes: Elite 1500 (with Race Functions) ECU, Plug’n’Play Adaptor, M14 x 1.5 air temp sensor, plug and pins.
:
:
:
List Price: $1,800.00
Price: $1,800.00

Haltech Elite 1500 Plug And Play Eclipse 1G Turbo
Previous1 of 2Next
Product ID: HT-Elite-150942

Details 

Part Number: HT-150942
Suits: Mitsubishi Eclipse 1G Turbo (MY90-94)
Includes: Elite 1500 (with Race Functions) ECU, Plug’n’Play Adaptor, M14 x 1.5 air temp sensor, plug and pins.

Haltech Elite Series ECUs take the art of engine management to a brand new level. With a waterproof case, drive-by-wire, exhaust cam and knock control the Elite Series ECUs provide cutting edge technology to tuners and performance enthusiasts world-wide.

Haltech Elite Series ECUs take the art of engine management to a brand new level. With a waterproof case, drive-by-wire, exhaust cam and knock control the Elite Series ECUs provide cutting edge technology to tuners and performance enthusiasts world-wide.

:
:
:
List Price: $1,800.00
Price: $1,800.00

Haltech Elite 2000 LS Terminated Harness Kit (Gen III LS engines)
Previous1 of 3Next
Product ID: HT-Elite-151260-LS_GenIII

Details 

Untitled 2

Simplify your LS install with Haltech's Terminated harness! Elite ECU and a plug and play harness ready to LS swap anything and everything!

LS Swap the world!

 Includes Elite 200 ECU and Terminated harness for Gen III based engines (LS1/LS6, 5.3/6.0 Vortec LM7/LQ4/LQ9) Ignition Coil and sub-harness no included.

:
:
:
Price: $2,275.00

Link MX5/Miata Plug and Play ECU
Product ID: Link-MX5Link

Details 

Free yourself from the constraints of the Factory ECU! The Link G4+ MX5Link MX5+ PlugIn fits the Mazda MX5 1600-1800 (NA models) and the GTX/R (1800cc). The ECU PCB fits discretely inside the original factory enclosure.
:
:
List Price: $815.45
Price: $800.00

Link G4+ PlugIn ECU Modules
Product ID: Link-PlugIn

Details 

Free yourself from the constraints of the factory ECU. The Link G4+ Plug-In fits discretely inside the original enclosure. Installation is a breeze with no alteration of the factory wiring loom required. A built-in connector (or pins in some models) provides additional inputs and outputs such as oil pressure inputs or anti-lag / logging switches (the number available depends on the application) Pricing Varies by application: SPECIAL ORDER ONLY!
:
:
:
List Price: $1,524.38
Price: $1,524.38

MoTeC M800 WRX 99-08 PlugIn ECU
Product ID: MT-M800-WRX

Details 

MoTeC M800 Plug-In ECUs are fully programmable, direct replacements for factory ECUs on a select number of popular vehicle models. Based on the M800, they control the latest automotive advances such as continuously variable camshaft timing and drive by wire throttle. Complete with an OEM connector, M800 Plug-Ins are convenient and cost effective to install because they eliminate the need to rewire the vehicle. They simply plug into the factory wiring harness using the original sensors, ignition modules and fuel system. The units are built to operate with saturated drive fuel injectors.
Price: $3,499.00

« Previous | 1 | 2 | »


   

Products Available at www.TunerTools.com

2014 Chevy/GMC Duramax is tuned!  +81 HP & +170 ft/lb of torque!

Jeep Wrangler JK 3.6L 2012-2014 is now tuned!

Harley Davidson Tuner!
The Vigilante

Autoland Scientech
Diagnosis Online Solutions
"DOL"
Now Available!

Toyota Tundra Tuning!
Tacoma, Sequoia, & 4Runner
Up to 30 HP!

LC-1 Wideband Clearance Sale!  $147.50

2013 Dodge, Chrysler, & Jeep 3.6L, 5.7L & 6.4L Tuned!

Diablosport has tuned the 2014 Camaro SS!


Tuner Tools Facebook PageTuner Tools on TwitterTuner Tools on Linked In
Tuner Tools LLC
888 OBD TUNE
Contact Us

 

 

 

 

home - site map - search - brands - about us - contact - privacy - terms of service - cart

Tuner Tools Affiliates: Access your account here
Copyright 2006-2016 Tuner Tools LLC - All Rights Reserved Worldwide