Contact us at 888-OBD-TUNE (888-623-8863)    

Hours: Mon-Thur 9AM to 6PM, Fri 9AM-5PM, Sat/Sun by Appointment Only     

1958 East Walnut Street    
Unit D     
Columbus, Ohio 43205    

Email: Sales@tunertools.com
 
  Shop ServicesBrandsSearchContact UsAboutSite MapPrivacyTermsCheckout              


Dealer Inquiry (dealers ONLY please)





Home » Haltech

  Checkout
Product ID: HT-Elite-150622-Miata_NA
Haltech Elite 750 Miata Plug and Play Kit
Haltech Elite 750 Miata Plug and Play Kit
Untitled 2 Untitled 1

Haltech Elite 750 Miata Plug & Play Kit

Haltech's Plug’n’Play Adaptor Harnesses allow you to use Haltech’s universal Elite ECUs by connecting them directly to the factory harness in your car via a Plug’n’Play adaptor. 
This is an ideal solution for builders and tuners who want a quick and easy install without the need to rewire the whole system.


Suits: Mazda MX-5 (Miata) 1.6L and 1.8L with 2 Plug, 2 Row ECU.


Includes: Elite 750 ECU. Adaptor Harness. M14 x 1.5 Air Temp Sensor and plug and pins. Auxiliary I/O 16 Pin TYCO plug and pins.
Note: Does not support USDM OBDII MY96-97, Special Edition SE or Anniversary Models as a Plug & Play model.

Includes the powerful Elite 750 ECU!

The Elite 750 is an entry-level ECU offering many features available on the more  advanced Elite ECUs at an affordable price. Featuring a robust, environmentally  sealed, waterproof case, 6 fuel and ignition channels, on-board data logging and  flex fuel tuning the Elite 750 is a powerful, compact ECU.

Elite750_exploded_web

The Elite 750 ECU is powered by the Elite Software Programmer (ESP) - a powerful  yet intuitive software that brings with it levels of functionality and ease of  use never seen before in an engine control package.

 

Features:
- Waterproof Case (IP67) (with USB Cover Fitted)
- 34 Position AMP connector
- 6 x Fuel Injection Outputs (Peak And Hold (0-8A Peak / 0-2A Hold)
- 6 x Ignition Outputs
- 2 x Engine Position Inputs with extensive trigger type support
- 2 x Digital Pulsed Inputs (Digital inputs only supported)
- 5 x Digital Pulsed Outputs
- 2 x Analogue Voltage Inputs
- 1 x Throttle Position Input
- 1 x Coolant Temperature Input
- 1 x Air Temperature Input
- 1 x CAN Bus communication for Haltech CAN Expansion
- Internal 3Bar Map Sensor rated up to 200kPa of Boost (2bar/29psi)
- On-board Data Logging
- ESP Calibration Software - Intuitive and easy to use
- Multi-fuel Support - Support for Petrol (Gasoline),Methanol and Ethanol
- E85 Flex Fuel Ready - Direct connection to sensor
- User definable tables
- Closed Loop O2 Control
- Closed Loop Idle Control - with learning for consistent idle stability
- Single Sensor VVT Only*
- Auto Tune Capabilities - short and long term fuel and idle learning
- ECU comes fully enabled, no additional charges for advanced features.
- Sequential, semi sequential, batch or multipoint injection patterns
- Distributor ignition systems, multi-coil systems or Haltech Multiplex CDI  systems
- Load sensing by: Throttle Position (TPS), Manifold Absolute Pressure (MAP) or  Mass Air Flow (MAF)

Inputs and Outputs:
- 6 x Fuel Injection Outputs (Peak And Hold (0-8A Peak / 0-2A Hold)
- 6 x Ignition Outputs
- 2 x Engine Position Inputs with extensive trigger type support
- 2 x Digital Pulsed Inputs (Digital inputs only supported)
- 5 x Digital Pulsed Outputs
- 2 x Analogue Voltage Inputs
- 1 x Throttle Position Input
- 1 x Coolant Temperature Input
- 1 x Air Temperature Input
- 1 x Internal 3Bar Map Sensor rated up to 200kPa of Boost (2bar/29psi)
- 1 x CAN Bus communication for Haltech CAN Expansion

Data Logging:
- On-board Data Logging
- Data logging,Up to 10 channels of logging,
- Fastest Sample Rate 20ms
- 512Kb Internal Storage

- Variable Cam  Control supported for engines with a single cam sensor only, located on the  variable cam.
VVT Engines Supported – Toyota 1JZ/2JZ VVT, Toyota 1ZZ and 2ZZ , Mazda MX5 NB  with VVT , Mazda / Ford Duratec, Suzuki M Series

 

:
:
:
:
 
List Price: $1,800.00
Price: $1,519.00

 
« Previous | Next »


   

Products Available at www.TunerTools.com

2014 Chevy/GMC Duramax is tuned!  +81 HP & +170 ft/lb of torque!

Jeep Wrangler JK 3.6L 2012-2014 is now tuned!

Harley Davidson Tuner!
The Vigilante

Autoland Scientech
Diagnosis Online Solutions
"DOL"
Now Available!

Toyota Tundra Tuning!
Tacoma, Sequoia, & 4Runner
Up to 30 HP!

LC-1 Wideband Clearance Sale!  $147.50

2013 Dodge, Chrysler, & Jeep 3.6L, 5.7L & 6.4L Tuned!

Diablosport has tuned the 2014 Camaro SS!


Tuner Tools Facebook PageTuner Tools on TwitterTuner Tools on Linked In
Tuner Tools LLC
888 OBD TUNE
Contact Us

 

 

 

 

home - site map - search - brands - about us - contact - privacy - terms of service - cart

Tuner Tools Affiliates: Access your account here
Copyright 2006-2016 Tuner Tools LLC - All Rights Reserved Worldwide