HP Tuners VCM Suite: includes 8 credits with the purchase
(either GM or Ford). See options for Pro, Standard, GM or Ford and additional
VERSION 2.24 Now Shipping!
The most popular & most powerful General Motors laptop tuning
equipment has released the long anticipated new version 2.24 and now includes
support for dozens of new vehicles right up into the 2013 models! Examples of
new vehicle coverage includes:
2010-13 Camaro V8 ECM/TCM
2009-13 Corvette ECM/TCM
2009-13 CTS V8 ECM/TCM
2009-13 Savana/Express V8 gas
2009-2013 Escalade ECM/TCM
2009-2013 Silverado/Sierra E38 V8
ECM/T42 & T43 TCM
2009-2013 Tahoe ECM/TCM
2009-2013 Suburban ECM/TCM
2009-2013 Avalanche ECM/TCM
2011-2013 Cruze 1.4ltr I4
2012-2013 Sonic 1.4ltr I4
2013 Vauxhall Astra 1.4ltr I4
>>>> and many, many more (see supported vehicle list here)!
The HP Tuners VCM Editor utility is a comprehensive VCM/PCM
programmer and parameter editor.
VCM Editors Flash utility allows the user to read the VCM/PCM flash memory and
save it to a binary file. The Flash utility allows a valid calibration to be
written to the VCM/PCM and also incorporates an automatic VCM/PCM recovery
capabilities for ultimate protection against any reflashing problems that may be
Supported Vehicles |
VCM Enhancements |
The HP Tuners VCM Editor also allows modification of the saved
binary image. The VCM Editor allows all parameters such as Spark, Fuel, RPM
Limits, FAN Temps, Transmission Shift points and pressures, Speedometer settings
and many, many more. The editor provides an easy to use graphical interface and
many powerful table manipulation capabilities such as copying, scaling and
shifting to name a few.
Where Standard vs. Pro differ is the Pro version offers
stand-alone data logging that allows you to scan the car without hauling a
computer along with you. The Pro version also accepts 0-5V inputs so that you
can log air fuel ratio (or other information) along with your OBD2 parameters.
With that said, I would seriously consider the MPVI Pro if you have (or are
planning) any sort of modifications to the vehicle(s) you will be tuning as this
will allow you to data log your Air Fuel Ratio etc. and display it right along
with the parameters logged with HP Tuners Scanner. This eliminates the need to
analyze data from a separate software system, or worse yet, write down the AFR
at certain RPM and load points. Otherwise, if you will not be modifying the
vehicle, the Standard will be more than sufficient.
Both the Pro and Standard come with 8 credits.
Supported Vehicles |
VCM Enhancements |
Minimum System Requirements:
Windows 98SE/2000/XP or Better
800 MHz PC or Laptop
256 MB of RAM
So you're probably thinking, what else could there be for a
professional tuner? Well, read on...
The VCM Suite has certain features that a professional tuner may find more
useful. It includes some of the following extra capabilities.
VCM Editors Flash utility allows not just calibration reflashing and automated
recovery, but entire VCM/PCM image reflashing. This means that you are free to
make any operating system or calibration level modifications and flash those to
the VCM/PCM. This has many uses for the advanced enthusiast, serious tuner or
engine swap shop, allowing complete control over the VCM/PCM software
The VCM Editor also allows for increased vehicle support for tuners, and also
access to extra VCM/PCM operating system code modifcations. Tuners also have the
option to modify VIN's, a useful feature for mail order VCM's.
Protect your tunes with Tunerlock. Only you have the ability to read and write
to VCM/PCM's that you have Tunerlocked. Prevent unwanted access to your hard
The VCM Scanner utility is a fully featured OBDII scanning and diagnostic
It allows viewing, charting and logging of diagnostic data in real time via the
vehicle OBDII diagnostic data port. It also allows viewing of vehicle Diagnostic
Trouble Codes (DTC's) and other vehicle information. Built in VCM controls also
supported. Command fans, closed loop, gear select, timing, air fuel ratio and
more real time! No editor package can be considered complete without
comprehensive scan tool capabilities.
VCM Suite is the complete package
These components combine to make VCM Suite the most feature rich, powerful and
comprehensive VCM/PCM reprogramming and diagnostics package available on the
market today. In addition, our attractive make/model/year based licensing
structure makes VCM Suite a clear leader in value for money.
VCM Suite is the ultimate tuning tool designed for your serious tuner and tuner