Contact us at 888-OBD-TUNE (888-623-8863)    

Hours: Mon-Thur 9AM to 6PM, Fri 9AM-5PM, Sat/Sun by Appointment Only     

1958 East Walnut Street    
Unit D     
Columbus, Ohio 43205    

Email: Sales@tunertools.com
 
  Shop ServicesBrandsSearchContact UsAboutSite MapPrivacyTermsCheckout              


Dealer Inquiry (dealers ONLY please)





Home » Mishimoto

  Checkout
Product ID: MM-INT-WRX-15BK
Manufacturer: Mishimoto
Mishimoto 15+ Subaru WRX Front-Mount Intercooler Kit
Mishimoto 15+ Subaru WRX Front-Mount Intercooler Kit
Previous 1 of 4 Next

Mishimoto has expanded their line of 2015 WRX parts. Designed for applications that demand the greatest airflow and cooling capabilities, the Mishimoto 2015 WRX Front-Mount Intercooler Kit will provide your 2015 WRX with the ability to make the most horsepower and torque possible. This 2015 WRX intercooler was designed with a large 28 intercooler core that provides the maximum cooling capability without excessive pressure drops that will wear out any turbocharger over time. The Mishimoto 2015 WRX front-mount intercooler features smooth cast end tanks that are CFD tested for maximum airflow with no sharp walls or bends from cut-and-weld end tanks that disrupt airflow. The intercooler provides the best airflow and heat-exchange properties for those time-attack laps, or a 10-second blast down the quarter mile.

The Mishimoto Subaru WRX Front-Mount Intercooler also features four mandrel-bent aluminum pipes for optimum airflow. The hot-side pipes are 2.25 in diameter to keep airflow velocities high, giving your car an instant response without the excessive throttle lag that plagues many front-mount intercooler designs. The hot-side pipe also features a CNC-machined flange for a leak free connection to the turbo. The cold side of the system features 2.5 to 2.75 mandrel-bent aluminum tubing for maximum airflow and to match the diameter of your throttle body. This 2015 WRX front-mount intercooler kit contains everything needed for a worry-free installation, including an application-specific crash bar that both supports the intercooler and mounts to existing points on the vehicle. No cutting of the front bumper or drilling is required to install the crash bar and intercooler.

The kit includes all necessary mounting brackets, including a new bracket for the air intake. The 2015 WRX front-mount intercooler kit also includes every coupler and clamp you need for a clean install, and complements the Mishimoto Subaru WRX Performance Air Intake for added cooling power. Mishimoto tested this WRX intercooler on our Stage 2 265 whp 2015 WRX to find significant drops in AITs (air intake temperatures), and it has also been flow tested to over 600 whp! The 2015 WRX front-mount intercooler is available with either a Sleek Silver or Stealth Black cooler and, like all our 2015 WRX parts, includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship. Worried that paint reduces performance? Check out our Painted Intercooler Engineering Report to learn how we debunked that myth!

    • Fits the 2015+ Subaru WRX
    • Intercooler available in Sleek Silver, Stealth Black, or Bold Gold
    • Mishimoto Lifetime Warranty
    • CARB EO #: D-759
    • 3.5" Thick intercooler design optimized for maximum flow
    • Designed to work with Mishimoto Performance Air Intakeand stock intake
    • No modification to front bumper and retains stock fog lights
    • Includes black powder-coated steel, tubular crash bar
    • Smooth cast end tanks allow the best possible airflow in and out of the intercooler
    • Optimal core design for maximum cooling efficiency with minimal pressure drop
    • Rated to 600 whp
    • Includes all necessary couplers, brackets, and accessories

TECH SPECS

Installation Torque Specs27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).

22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M).

Silicone Couplers(1) 2.25" 45° Coupler
(1) 2.25" to 2.75" 45° Transition Coupler
(1) 2.5" to 2.75" 55° Transition Coupler
(1) 2.5" to 2.75" 65° Transition Coupler 
(1) 2.75" Straight Coupler

Purchase Includes(1) Bar-and-Plate Intercooler
(1) Steel Crash Bar w/Mounting Hardware
(2) Hot-Side Intercooler Pipes
(2) Cold-Side Intercooler Pipes
(1) Air Intake Bracket 
(1) 2.25" 45° Coupler
(1) 2.25" to 2.75" 45° Transition Coupler
(1) 2.5" to 2.75" 55° Transition Coupler
(1) 2.5" to 2.75" 65° Transition Coupler 
(1) 3.00" Straight Coupler 
(1) BPV Recirculation Hose
(1) BPV Vacuum Hose
(1) 30-45mm Worm Gear Clamp
(2) 1.75" T-Bolt Clamps
(3) 2.5" T-Bolt Clamps
(2) 2.75" T-Bolt Clamps
(5) 3" T-Bolt Clamps
Mishimoto Lifetime Warranty

NoteMishimoto recommends that this intercooler kit, not be used with the stock ECU programming. It is highly recommended that the customer be able to retune the vehicle’s ECU after installing the intercooler kit. Power gains will vary depending on the size of the turbo, exhaust system, fuel system, and type of ECU tune that is applied to the vehicle.

This kit is rated for approximately 600 whp during normal operating conditions. Maximum horsepower potential will be near 700 whp. Exceeding these horsepower or pressure limits could require a custom-size front-mount intercooler.

THIS FRONT-MOUNT INTERCOOLER KIT WILL NOT FIT WITH THE MISHIMOTO 2015+ WRX OIL COOLER KIT

CRASH BAR SPECS
Steel Construction with Black Powder Coat
Application-Specific Mounting Holes

Installation Torque Sepcs
27 in-lbs (3N*M) recomended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).

Pipe DiameterHot-Side: 2.25"
Cold-Side: 2.5"& 2.75"

Constant Tension T-Bolt Clamps Specs(2) 1.75" T-Bolt Clamps
(3) 2.5" T-Bolt Clamps
(2) 2.75" T-Bolt Clamps
(5) 3" T-Bolt Clamps

Core Thickness3.5"

Cold-Side Intercooler Pipe Specs-Made from Polished Mandrel-Bent Aluminum 
-2.5" & 2.75" I.D. Pipes
-Includes Upper and Lower Intercooler Pipes

Hot-Side Intercooler Pipe Specs-Made from Polished Mandrel-Bent Aluminum 
-2.25" I.D. 
-Hot-Side has CNC-Machined Flange for a Leak Free Connection to Turbo
-Includes Two Lower Intercooler Pipes

Engine CodesFA20DIT

Chassis CodesVA

Fits2015+ Subaru WRX

Tank Wall Thickness3.5mm

Max Rec. PSI30 psi

Outlet2.75"

Core Length28"

Core Height8.05"

Core Width3.5"

Inlet2.45"

Core Size28" x 8.05" x 3.5"

Overall Width5.4"

Overall Height8.6"

Overall Length37.7"

ConstructionBar-and-Plate

Max Rec. HP600 whp

MakeSubaru

 

 

:
 
List Price: $1,529.83
Price: $1,096.00

 
« Previous | Next »


   

Products Available at www.TunerTools.com

2014 Chevy/GMC Duramax is tuned!  +81 HP & +170 ft/lb of torque!

Jeep Wrangler JK 3.6L 2012-2014 is now tuned!

Harley Davidson Tuner!
The Vigilante

Autoland Scientech
Diagnosis Online Solutions
"DOL"
Now Available!

Toyota Tundra Tuning!
Tacoma, Sequoia, & 4Runner
Up to 30 HP!

LC-1 Wideband Clearance Sale!  $147.50

2013 Dodge, Chrysler, & Jeep 3.6L, 5.7L & 6.4L Tuned!

Diablosport has tuned the 2014 Camaro SS!


Tuner Tools Facebook PageTuner Tools on TwitterTuner Tools on Linked In
Tuner Tools LLC
888 OBD TUNE
Contact Us

 

 

 

 

home - site map - search - brands - about us - contact - privacy - terms of service - cart

Tuner Tools Affiliates: Access your account here
Copyright 2006-2016 Tuner Tools LLC - All Rights Reserved Worldwide