Contact us at 888-OBD-TUNE (888-623-8863)    

Hours: Mon-Thur 9AM to 6PM, Fri 9AM-5PM, Sat/Sun by Appointment Only     

1958 East Walnut Street    
Unit D     
Columbus, Ohio 43205    

Email: Sales@tunertools.com
 
  Shop ServicesBrandsSearchContact UsAboutSite MapPrivacyTermsCheckout              


Dealer Inquiry (dealers ONLY please)





Home » Mishimoto

  Checkout
Product ID: MM-TMIC-WRX-15
Manufacturer: Mishimoto
Mishimoto 2015 Subaru WRX Top-Mount Intercooler Kit
Mishimoto 2015 Subaru WRX Top-Mount Intercooler Kit
Previous 1 of 4 Next

Mishimoto is expanding their line of 2015 WRX parts! Are you looking for a way to reduce high intake temperatures on your stock or modified 2015 WRX? The solution is the Mishimoto direct-fit 2015 WRX top-mount intercooler kit engineered specifically for the 2015+ Subaru WRX. The stock 2015 WRX intercooler is prone to heat soak during repeated wide open throttle pulls and during track use. Mishimoto engineers spent months designing the 2015 WRX parts and testing this new 2015 WRX top-mount intercooler to ensure optimum performance on both the street and track. This 2015 WRX intercooler utilizes durable cast aluminum end tanks TIG-welded to a highly efficient, dense bar-and-plate core. The Mishimoto 2015 WRX intercooler has a 4 thick core and a total volume of 625 in3, making it one of the largest top-mount intercoolers you can buy. Thanks to this volume and a very dense offset fin pitch, we are able to optimize heat transfer and support your 2015 WRX from stock up to 500 whp. This WRX intercooler endured rigorous testing, showing a 35 F temperature drop as well as a +15 whp and +8 wtq bolt-on power increase for our test vehicle equipped with a Mishimoto 2015 WRX downpipe and stage 2 EcuTek tune.

Installation is simple, requires no modification to any parts in the engine bay, and can be completed in under 1 hour. Included with this top-mount intercooler is Mishimoto’s innovative 2015 WRX charge-pipe, utilizing a one-piece construction without the need for several couplers and clamps. An application-specific air splitter is included with the top-mount intercooler to help divert the maximum amount of air into your Mishimoto 2015 WRX top-mount intercooler. The WRX top-mount intercooler kit also includes a new charge-pipe to intercooler hose, an intercooler to throttle body hose, and a new bypass valve hoses. These 2015 WRX parts negate the need to gather supplies for installation, and they ensure years of reliable service. This 2015 WRX intercooler is available in a durable powder-coated finish of Sleek Silver and Stealth Black, with your choice of either a polished, wrinkle black, or wrinkle red pipe, and, like all our 2015 WRX parts, this top-mount intercooler kit includes the Mishimoto Lifetime Warranty.

      • Direct fit for the 2015+ Subaru WRX
      • Comes with all necessary hardware, clamps, and brackets for an easy installation
      • Pre-marked area for NPT sensor
      • Cooler available in durable powder-coated Sleek Silver or Stealth Black finish
      • Mishimoto Lifetime Warranty
      • CARB EO #: D-759
      • Provides 35°F temperature drop compared to stock intercooler on a stage 2 tune
      • Proven +15 whp and +8 wtq bolt-on power increase on a stage 2 tune
      • 100% aluminum construction with durable cast end tanks TIG-welded to a highly efficient bar-and-plate core
      • TIG-welded to a highly efficient bar-and-plate core
      • Intercooler core designed for maximum cooling efficiency and minimal pressure drop
      • Includes larger air duct designed to provide optimal airflow to the Mishimoto intercooler core
      • Includes the Mishimoto intercooler charge-pipe for maximum airflow and power capability
      • Includes new BPV hoses, hot side coupler, and silicone throttle body hose

TECH SPECS

Installation Torque Specs27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M). 

22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M).

Purchase Includes(1) Bar-and-Plate Intercooler 
(1) Charge-Pipe 
(1) Intercooler Mounting Bracket 
(1) Air Diverter with Attached Rubber Gaskets 
(1) Charge-Pipe to Intercooler Hose 
(1) Intercooler to Throttle Body Hose 
(3) Bypass Valve Hoses 
(2) 3" T-bolt Clamp 
(2) 3.5" T-bolt Clamp 
(4) Worm-Gear Clamps 
Mounting Hardware 
Mishimoto Lifetime Warranty

NoteThis kit is rated for 300–450 whp with maximum limits of approximately 500 whp, or 35 psi of turbo boost. Exceeding that horsepower or pressure limit may require a larger front-mount intercooler. 

Tuning is not necessary after installing our top-mount intercooler and charge-pipe, but you will see optimal performance if tuning is performed after the intercooler is installed. 

The top-mount intercooler will not fit with the stock engine cover due to its larger size. 

Charge Pipe Construction: 
Aluminum casting with T6063 aluminum tubing

Pipe DiameterID: 
2.19" at the turbo transitioning to 2.60" at the intercooler hose 

OD: 
2.75" at the intercooler hose

Constant Tension T-Bolt Clamps Specs(2) 3" T-bolt Clamp 
(2) 3.5" T-bolt Clamp 
(4) Worm-Gear Clamps

Core Thickness4"

Hot-Side Intercooler Pipe SpecsI.D. 2.19" at the turbo, transitioning to 2.60" at the intercooler hose 
O.D. 2.75” at the intercooler hose 

CHARGE-PIPE TO INTERCOOLER HOSE SPECS 
2.75" I.D. 
3.15" O.D. 
4mm thick

Intercooler/Throttle Body Coupler Specs2.75" I.D. 
3.15" O.D. 
4mm thick

Engine CodesFA20DIT

Chassis CodesVA

Fits2015+ WRX, 2014+ Forester XT

Weight24.5 lbs

CoatingPowder Coated

Tank Wall Thickness3.5mm

Fin PitchInternal: 4.7mm fin height, 2.8mm fin pitch 
External: 4.7mm fin height, 1.7mm fin pitch

Max Rec. PSI35 psi

Outlet3"

Core Length15"

Core Height10"

Core Width4"

Inlet2.5"

Core Size15" x 10" x 4"

Overall Width5"

Overall Height10"

Overall Length24"

ConstructionBar-and-Plate

Max Rec. HP450 whp

MakeSubaru

 

 

:
 
List Price: $1,362.33
Price: $976.00

 
« Previous | Next »


   

Products Available at www.TunerTools.com

2014 Chevy/GMC Duramax is tuned!  +81 HP & +170 ft/lb of torque!

Jeep Wrangler JK 3.6L 2012-2014 is now tuned!

Harley Davidson Tuner!
The Vigilante

Autoland Scientech
Diagnosis Online Solutions
"DOL"
Now Available!

Toyota Tundra Tuning!
Tacoma, Sequoia, & 4Runner
Up to 30 HP!

LC-1 Wideband Clearance Sale!  $147.50

2013 Dodge, Chrysler, & Jeep 3.6L, 5.7L & 6.4L Tuned!

Diablosport has tuned the 2014 Camaro SS!


Tuner Tools Facebook PageTuner Tools on TwitterTuner Tools on Linked In
Tuner Tools LLC
888 OBD TUNE
Contact Us

 

 

 

 

home - site map - search - brands - about us - contact - privacy - terms of service - cart

Tuner Tools Affiliates: Access your account here
Copyright 2006-2016 Tuner Tools LLC - All Rights Reserved Worldwide