Home » Mishimoto
A high-horsepower Evo demands an intercooler that provides optimal airflow and a
cool, dense charge of air. Modified vehicles running high-boost pressures often
suffer from increased air intake temperatures (AITs) and heat soak, which can
result in diminished performance. Keep your intake temperatures under control
with the Mishimoto Mitsubishi Lancer Evolution X Performance Intercooler. This
intercooler is a direct bolt-on unit engineered specifically for the Evo X.
Thanks to an efficient 3.5" thick bar-and-plate core, this intercooler provides
optimal heat dissipation and low AITs. The robust cast aluminum end tanks
provide superior durability and smooth, uninterrupted airflow. The Mishimoto
Mitsubishi Lancer Evolution X Performance Intercooler provides a dyno-proven
increase of 10 whp and 10 tq, and it will support modified vehicles up to 600
whp! This Evo intercooler core is equipped with a strategic fin design that
promotes substantial heat exchange while providing minimal pressure loss across
the core. Whether you are making a pass at the drag strip or sliding around a
rally stage, this intercooler will provide the cooling that your engine needs to
perform at its best. This Evo intercooler is available with a powder-coated
finish in either Sleek Silver or Stealth Black. As with all our products, this
intercooler includes the Mishimoto Lifetime Warranty
Installation Torque Specs27
in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt
clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M).
Do not exceed the maximum torque rating of 35 in-lbs (4N*M).
22 in-lbs (2.5N*M) recommended for
all worm-gear clamps. These clamps have an operating range of 18-27
in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs
Silicone Couplers, Black
CNC Mounting Pegs
Mishimoto Lifetime Warranty
intercooler can be used with stock or aftermarket intercooler pipes. The
CNC mounting pegs must be installed by the customer.
Constant Tension T-Bolt Clamps Specs(10)
2.75" T-Bolt Clamps(1) 2" T-Bolt
Clamp(1) 3" T-Bolt Clamp
Tank Wall Thickness3.5mm
6.35 fins per inch
Internal: 7.5 fins per inch
x 12" x 3.5"
« Previous | Next »
2014 Chevy/GMC Duramax is tuned! +81 HP & +170 ft/lb of torque!
Jeep Wrangler JK 3.6L 2012-2014 is now tuned!
Harley Davidson Tuner!The Vigilante
Autoland ScientechDiagnosis Online Solutions"DOL"Now Available!
Toyota Tundra Tuning!Tacoma, Sequoia, & 4RunnerUp to 30 HP!
LC-1 Wideband Clearance Sale! $147.50
2013 Dodge, Chrysler, & Jeep 3.6L, 5.7L & 6.4L Tuned!
Diablosport has tuned the 2014 Camaro SS!
Tuner Tools LLC
888 OBD TUNE
brands - about
us - contact
- privacy -
terms of service -