The M880 is
MoTeCâ€™s top of the line ECU.
Developed for motorsport professionals, it takes the M800engineering
one step further with an Autosport connector, Advanced Functions** as standard
and an optional 4 MB logging memory.
This powerful ECU suits the same broad scope of applications as the M800,
including modern engines with
up to 12 cylinders and twin, triple or quad rotor applications.
It offers maximum sophistication to control the latest automotive advances, such
as continuously variable camshaft timing and drive by wire throttle, while
maintaining the flexibility to suit a range of users.
* Advanced Functions includes: Traction Control, Launch Control, Gear Change
Ignition Cut (flat shifts) and Overrun Boost Enhancement (anti-Lag).
** Optional injector / ignition configurations:
(requires 10/12 Cylinder Sequential upgrade)
10 high ohm injector outputs and 4 ignition outputs
12 high ohm injector outputs and 2 ignition outputs
8 x Analogue voltage inputs-fully configurable including custom calibrations
6 x Analogue temperature inputs-fully configurable including custom
2 x Wideband Lambda inputs-for Lambda measurement and control
4 x Digital/speed inputs-for wheel speeds and function activation
Engine Tuning Features
Windows based ECU Manager tuning
software with user definable screen layouts
Individual cylinder tuning of both fuel delivery and ignition timing
Suits modern engines, including those with coil per cylinder ignition
4D fuel and ignition tables for engine mapping based on three channels **
Selectable channels for table axes **
Fully configurable axis points on all tables **
Highly configurable crank and cam trigger inputs to suit almost all OEM
sensors and tooth patterns
Free access to wideband Lambda and data logging for initial tuning.
Available for the first 8 hours engine running time
Additional Distinct Features
Internal data logging (1 MB or 4 MB) with fast download via CAN
Three engine histogram logs including a tell-tale log **
State of the art i2
Standard or i2 Pro data
Telemetry and remote logging options
Upgradable with optional functionality to make additional features available
when you want them, activated through a simple password system.
** Only available with Version 3 software
Several options are available as upgrades to customise and grow your system.
These additional features are activated through a simple
password system, at any time when you need it.
For the M880 engine
management system the following upgrades are available:
Data Logging 1MB
Allows recording of all ECU data
to the 1 MB internal logging memory and analysing the data with MoTeC's i2
Standard software. This
option is enabled for a free evaluation period of the first 8 hours engine
Data Logging 4MB
Increases the internal logging memory to 4 MB. Requires the Data Logging 1 MB
Provides access to advanced i2
Pro data analysis
software with multiple graph overlays, X-Y plots, advanced maths functions,
synchronised video (manual alignment), and flexible layouts to accommodate
virtually any user preference. Requires the Data Logging 1 MB upgrade.
Enables transmission of live data from the vehicle to the pit where it can be
viewed in real time using the MoTeC Telemetry Monitor software. Requires radio
modems or other means of transmission.
Enables converting telemetry data into a log file to use with i2 data
analysis software. Requires the Telemetry upgrade.
Allows the use of the onboard wideband Lambda controller for NTK UEGO or Bosch
LSU sensors. Available in single version, expandable to the dual version. The
single version is enabled for a free evaluation period of the first 8 hours
engine running time.
Continuously Variable Camshaft Control
Enables camshaft control with each cam independently adjustable in 0.5 degree
increments based on RPM and
Drive by Wire Throttle Control
Enables control of the throttle body actuator by interpreting the driver's pedal
input via sensors. Compatible with most OEM electronic throttles.
Allows the use of a 3D table to control a fast response, high torque DC or
Enables configuring ignition to fire multiple times and injectors to open twice
10/12 Cylinder Sequential
Enables up to 4 ignition outputs to be used as injector outputs, allowing for
10/12 high ohm injectors.
The following advanced functions are standard included in the M880:
Traction Control and Launch Control (2, 3 or 4 wheel)
Gear Change Ignition Cut (flat shifts)
Overrun Boost Enhancement* (anti-lag)