|
Scroll down to the bottom or click here to buy yours
now!
The Innovate
Motorsports LM-2 Air/Fuel Ratio Meter & OBD-II Kit
combines an air/fuel ratio meter, a full-function 32-channel datalogger,
and powerful software to deliver a complete tuning workshop for less than
the cost of one dyno day. Whether you have a piggy-back fuel controller,
race carb, aftermarket ECU, OBD-II tuning software, or a flash/chip
programmer, an LM-2 is the tool you need to dial in maximum HP. The
meter’s digital signal processing technology provides data on exactly how
rich or lean an engine is running at any load. The Innovate LM-2’s self-calibrating
circuitry also compensates for changes in temperature, altitude, and
sensor condition.
- Patented “Direct Digital” Wideband Technology
- Wideband O2 Air/Fuel Ratio Meter Compatible with ALL
fuel types
- Single (3806) or
Dual (3807) Channel Version
Available
- OBD-II Scan tool- read/clear DTCs and log up to 16
channels of CAN OBD-II Data
- Log directly to SD card (included) for easy transfer
to your PC or laptop for analysis
- Playback log data on screen and/or with powerful
LogWorks software (included)
- Large high-contrast graphics LCD
- Built-in RPM converter (direct frequency or with
optional inductive clamp)
- 4 fully-differential analog inputs
- 2 configurable linear analog outputs
- Positive lock connectors for all connections
- Innovate MTS serial IN and OUT
- USB connection to your PC
The Innovate Motorsports LM-2 also features two fully programmable linear
analog outputs to connect to analog gauges, dyno computers, ECUs,
piggyback controllers, and other devices with analog inputs. Analog output
1 comes setup from the factory ready for narrowband simulation; analog
output 2 is configured as 0 volt = 7.35 AFR and 5 volts = 22.39 AFR. With
the provided LM Programmer software these analog outputs may also be
configured by the user.
Scroll down to the bottom or click here to buy yours
now!
The LM-2 is available in two different kit configurations: (this is
3806 you're looking at now, buy this unit at the "Buy" button below or use
the link to part no 3807 if you want the dual O2 sensor model)
Part No 3806: The LM-2 Kit (Single Wideband O2) includes the LM-2 meter,
Bosch wide-band oxygen sensor, 10 ft sensor cable, cigarette-lighter power
adapter, analog in/out cable, OBD-II/CAN interface cable, SD memory card,
USB cable for PC connection, weld-in bung and plug, LogWorks software CD,
and quick-start guide. Carrying Case also included! P/N: 3806
$479
Part No 3807: The LM-2 Duo Kit (Dual Wideband O2) includes the LM-2 meter,
(2) Bosch wide-band oxygen sensors, (2) 10 ft sensor cables,
cigarette-lighter power adapter, analog in/out cable, OBD-II/CAN interface
cable, SD memory card, USB cable for PC connection, (2) weld-in bung and
plug kits, LogWorks software CD, and quick-start guide. Carrying Case also
included! P/N: 3807 $669.
The LM-2 3806
Kit (Single Wideband O2) includes the LM-2 meter, Bosch wide-band oxygen
sensor, 10 ft sensor cable, cigarette-lighter power adapter, analog in/out
cable, ODB-II/CAN interface cable, SD memory card, USB cable for PC
connection, weld-in bung and plug, LogWorks software CD, and quick-start
guide. Carrying Case also included!
|
