Fast guide to  Smarty-JR 06 Features

• CaTCHER software's inside

• Three different  performance levels: 40 / 70 / 100 hp

• Improved fuel economy

• Optimized drivability

• Fastest download in the industry, up to three times faster than the competition, a typical ECM update takes about 3.5 to 5 minutes, depending on the truck model

• ABS tire height updates in just few seconds from 22,5" to 44"

• Not traceable in the stock setting. Smarty leaves no footprint

• Manual High-Idle is enabled in all softwares

• Reads  Diagnostic Trouble Codes in plain text

• No tools required, no fuses to pull

• USB built in for simple updates from internet

• Easy installation

• Reliable, it works off your OEM hardware

• Now with the Power on Demand function!!!

Fast guide to Smarty-JR 06 software levels
The horsepower settings have a modified "Torque management" ( TQM ). The throttle response is greatly improved but is set to a safe limit. With "Safe" this means safe for your transmission and the rest of the driveline.

• SW # 1 : 40 Hp increase

• SW # 2 : 70 Hp increase

• SW # 3 : 100 Hp increase

Tested on stock trucks on a Dyno.
Stock means just that. Stock! Even the air filters were stock...

The trucks were S T O C K, even the wastegate settings! MADS Electronics checked the "baseline" ( the stock truck Hp at the rear wheels ) twice in a day in order to be sure about their findings. The above declared HP numbers are all rounded down to the closest number.

No trace is left in the ECM!
MADS Electronics herby CLAIM that SmartyCR is the FIRST AND ONLY downloader that does not erase any of the stored data in the ECM. Smarty does NOT leave any electronic footprints in the ECM or any other electronic module in the truck. Smarty does NOT set ANY codes once the ECM is set back to stock. Smarty does NOT need to have fuses pulled.

No matter what the competition claims , in one way or another they're ALL detectable.
Smarty is NOT!

Yet, Smarty can not do one thing for you. Fix what others have broken. Smarty can not restore a key on counter that another downloader has erased . Smarty can not fix VIN# troubles caused by other products. If your Check engine / ABS light is on because another product has screwed your ECM, Smarty can not fix it, the other guy HAS to...

ABS / Speedo recalibration
The tire height can be adjusted up to 44" in increments of 10 tenth of an inch in just a couple seconds. Of course, Smarty needs to be VIN# locked to the truck in order to get into the ABS adjustment section.

DTC Code reader
The name says it all.
You can read and erase codes. Codes are displayed also in plain English. That's old news by now. Smarty S-03 was the first one to provide that utility, others found the idea to be a good one too.  ( Smarty does erase ABS codes too but does not display them )

ECM update speed
Faster than anything else on the market! Again MADS Electronics has done their homework on the protocol. Less than 5 minutes. Three times faster than a Star-Scan diagnostic tool or competitor.

MADS Electronics has developed their own bootloader in order to not have to pull fuses should an update become interrupted for any reason. All you have to do is to turn the key off / key on Smarty does everything else on it's own.

Updates
The CaTCHER software as they are today are only a starting point. Expect major news in future. MADS Electronics is interested in your feedback, opinions, likes, dislikes...
MADS Electronics will make the Smarty do what YOU want, TOGETHER.