Now Available! The all new Tactrix OpenPort 2.0!
The OpenPort 2.0 is our newest tuning tool hardware
that is capable of communicating with a most OBDII compliant vehicles
using a standard interface. Combined with our EcuFlash software,
the OpenPort 2.0 is capable of reflashing a large number of newer
Subaru and Mitsubishi vehicles, and support for other cars is in
progress. Micro SD card is NOT included.
Adaptors/Initialization Connectors (NOT included in
this set) are required for:
You can download EcuFlash and the drivers for this product here.
Download and/or purchase PCMSCAN OBD-II software here. (Note:
PCMSCAN sees the OpenPort as an SAE J2534 pass-thru device so you
use the J2534 setting in
PCMSCAN)
Other software which works with the OpenPort 1.3 and 2.0 can be found
here.
A list of known vehicles supported by this cable and EcuFlash can be
found here.
Tactrix OpenPort 2.0 Technical Details
- 72Mhz 32-bit processor
- USB 2.0 full speed device
- Looks like a USB COM port to the operating system - no special
drivers needed
- Field upgradeable software
- Supports all major OBD protocols:
- CAN 2.0 (CAN/ISO15765)
- K-line (ISO9141/ISO14230(KWP2000)/dual K line)
- J1850 (PWM/VPW) W
- Standalone datalogs to microSD / microSDHC card without a laptop
- Able to apply GND or 8V-18V (5V-25V in a future
version) to OBD pins 1,3,9,11,12,13 or AUX 2.5mm stereo connector
- Able to log from Innovate Motorsports 2.5mm stereo data bus
- Using
PCMSCAN software under J2534 settings, will record and display
all global level OBD-II sensor data, PID information, Freeze Frame,
Readiness Monitor status and more (see
PCMSCAN page for details)
- Used with
PCMSCAN, can be used to merge and display OBD-II data with
Air/Fuel ratio data (via an auxiliary serial/usb port on the PC)
from any of the following AFR components:
- RGB status LEDs
IMPORTANT NOTES ON SOFTWARE FEATURES
Regarding the Tactrix OpenPort 2.0
The OpenPort 2.0 hardware has many features and
capabilities, not all of which have complete software support yet. We
are providing this product for sale now for customers who need the
features which are already working, or have use for the product until
the new features arrive. Here is a list of what works now, and what
will work in the future:
Working Now With The Tactrix OpenPort 2.0
- Reflash of ISO 9141 Subarus
- Reflash of CAN (ISO 15765) Subarus
- Reflash of Evo 5/6/7/8/9/10
- J2534 DLL
- CAN
- ISO 15765
- ISO 14230
- ISO 9141
NOT ENABLED - DEVELOPMENT IN PROGRESS
- J1850 (PWM/VPW)
- Logging to microSD
- EcuFlash logging software
- Mac/OSX support
|