 |
-
Add up to 35hp 65 ft.
lbs of torque
-
Increase mileage up to
10%
-
Simple Installation
-
Sturdy Steel
Construction
-
Powder Coated Finish
|
Quadzilla Monster Air
Intake for the 03-07 Dodge Cummins
Quadzilla Monster Air
Intakes are the finest quality most cost effective intake
kit on the market.
About the Intake:
All Monster
Air Intakes are made of 14 gauge metal and tig welded for
superior construction and appearance. Each intake is hand
assembled and welded in a job made from the particular
vehicle the intake is built for. This insures a perfect fit
for every intake. You will not find an intake system that is
easier to install anywhere.
Once the fit
is perfect and the intakes are completely welded they are
then powder coated using a wrinkled black finish that blends
in perfectly with your engine compartment.
The intakes
are the highest quality, longest lasting intakes available
anywhere. Don’t settle for cheap plastic imitations that are
prone to cracking or warping in the extreme temperature
environment under your hood.
 About the Filter:
Quadzilla has
teamed up with AFE filters to compliment our intakes. We
feel that these are the best filters with the least
maintenance at this time. While these filters are made by
AFE they were made for the Monster Air Intakes specifically.
CHOOSE A
BETTER OIL-FREE FILTER
Advanced FLOW
engineering offers you a better choice of oil-free filters:
New Pro Dry S synthetic dry-media filters. Pro Dry S filters
use a revolutionary two-ply synthetic material that is
functionally superior to traditional paper media and
single-ply synthetic, and easy to service. Pro Dry S
dry-media filters increase airflow providing improved
horsepower, torque, and fuel economy with 99.4%* filtration
efficiency. Perhaps the greatest benefit of new Pro Dry S
filters is the convenience of servicing these oil-free
filters. To clean a Pro Dry S filter lightly tap it on the
ground, vacuum it, or wash with soap and water. Solvents and
oiling are not necessary. Pro Dry S dry-media filters by aFe
are now available on all of our popular air intake systems
for gas and diesel trucks, SUVs, and cars. Replacement Pro
Dry S filters for all air intake systems are also available
and sold individually.
2-LAYER SYNTHETIC
CONSTRUCTION
FOR MAXIMUM AIRFLOW AND DUST-HOLDING CAPACITY
-
 Outer
screen provides strength and prevents damage to filter
media.
- Thick layer slows air
velocity so dust particles fall out of suspension and
become trapped in fabric fibers.
- High efficiency thin
layer traps remaining dust particles without slowing
airflow.
- Inner screen provides
support and quality without the need for additional
internal structures.
- Up to 50% airflow
increase over stock.
- 99.4% dust filtration
efficiency** for engine protection.
**Cumulative efficiency test per SAE J726 -
Coarse Dust test procedure using 21-40035 air filter.
Our revolutionary new
dry synthetic media is easy to clean, and offers three
cleaning options:
 Tap Clean:
You can tap your Pro Dry S filter and return it to 85% of
its original airflow. Simply remove your filter from your
Intake and lightly tap it on a solid surface. Tap and turn
the filter until most of the visible dirt has been released.
Reinstall the filter in your vehicle. Do not apply oil to
the filter.
 Vacuum
clean: You can vaccum your Pro Dry S filter and return it to
96% of its original airflow. Remove the filter from the
intake and vacuum away the dirt using a shop vaccum or a
regular house vaccum. Reinstall the filter in your vehicle.
Do not apply oil to the filter.
 Wash
clean: You can wash your Pro Dry S filter and return it to
100% of its original airflow. Remove the filter from the
intake kit. Run the filter under running water from the
inside out. Turn the filter to remove all visible and hidden
dirt. If your filter is coated with grease or road grime, it
may be necessary to use soap and water to get it fully
clean. You can completely submerge the filter in a mixture
of warm water and mild detergent (use a common household
detergent such as dish or liquid laundry soap) if needed.
Rinse clean. Allow the filter to dry completely (our
synthetic media dries quickly and should dry within a few
hours in normal conditions). Reinstall the filter in your
vehicle. Do not apply oil to the filter. |
