Fast guide to Smarty-JR 06
CaTCHER software's inside
performance levels: 40 / 70 / 100 hp
Improved fuel economy
Fastest download in the
industry, up to three times faster than the competition, a typical ECM
update takes about 3.5 to 5 minutes, depending on the truck model
ABS tire height updates in
just few seconds from 22,5" to 44"
Not traceable in the stock
setting. Smarty leaves no footprint
Manual High-Idle is enabled
in all softwares
Reads Diagnostic Trouble
Codes in plain text
No tools required, no fuses
USB built in for simple
updates from internet
Reliable, it works off your
Now with the Power on
Fast guide to Smarty-JR 06
The horsepower settings have a
modified "Torque management" ( TQM ). The throttle response is greatly improved
but is set to a safe limit. With "Safe" this means safe for your transmission
and the rest of the driveline.
SW # 1 : 40 Hp increase
SW # 2 : 70 Hp increase
SW # 3 : 100 Hp increase
Tested on stock trucks on a
Stock means just that. Stock! Even the air filters were stock...
The trucks were S T O C K, even the wastegate settings! MADS Electronics checked
the "baseline" ( the stock truck Hp at the rear wheels ) twice in a day in order
to be sure about their findings. The above declared HP numbers are all rounded
down to the closest number.
trace is left in the ECM!
MADS Electronics herby
that SmartyCR is the
FIRST AND ONLY
downloader that does not erase any of the stored data in the ECM. Smarty does
NOT leave any electronic footprints in the ECM or any other electronic module in
the truck. Smarty does NOT set ANY codes once the ECM is set back to stock.
Smarty does NOT need to have fuses pulled.
No matter what the competition claims , in one way or another they're ALL
Smarty is NOT!
Yet, Smarty can not do one thing for you. Fix what others have broken. Smarty
can not restore a key on counter that another downloader has erased . Smarty can
not fix VIN# troubles caused by other products. If your Check engine / ABS light
is on because another product has screwed your ECM, Smarty can not fix it, the
other guy HAS to...
ABS / Speedo recalibration
The tire height can be adjusted
up to 44" in increments of 10 tenth of an inch in just a couple seconds. Of
course, Smarty needs to be VIN# locked to the truck in order to get into the ABS
DTC Code reader
The name says it all.
You can read and erase codes. Codes are displayed also in plain English. That's
old news by now. Smarty S-03 was the first one to provide that utility, others
found the idea to be a good one too. ( Smarty does erase ABS codes too but does
not display them )
ECM update speed
Faster than anything else on
the market! Again MADS Electronics has done their homework on the
protocol. Less than 5 minutes. Three times faster than a Star-Scan diagnostic
tool or competitor.
MADS Electronics has
developed their own bootloader in order to not have to pull fuses should an
update become interrupted for any reason. All you have to do is to turn the key
off / key on Smarty does everything else on it's own.
The CaTCHER software as they
are today are only a
Expect major news in future. MADS Electronics is interested in your feedback,
opinions, likes, dislikes...
MADS Electronics will make the Smarty do what YOU want, TOGETHER.