Contact us at 888-OBD-TUNE (888-623-8863)
Hours: Mon-Thur 9AM to 7PM, Fri 9AM-5PM, Sat/Sun by Appointment Only

1958 East Walnut Street
Unit D
Columbus, Ohio 43205


  HomeBy VehicleSite MapSearchBrandsAbout UsContact UsPrivacyTermsCheckout

  Home  Cart
  Site Map

 Tuning & Reflash
    StandAlone ECUs
    Piggyback Tuning
    Tuning Interfaces           Tactrix
           EFI Live
           Sniper (Ford)
    Flash Tuners
           Edge (Diesel)
 Sensors & DAQ
     Knock Detection
     Wideband O2
     DAQ Modules
 Forced Induction
     Boost Controllers
     Boost Gauges
     Full Induction Kits
    OBD Scan Tool  
    J2534 Pass Thru
    Drew Technologies

Browse By:
   >>  By Vehicle
   >>  By Brand
   >>  By Type

5% off when you buy a Gizzmo k-lite with ANY wideband!  

Dealer Inquiry (dealers ONLY please)

Home » Brand Line Card » Smarty / MADS Electronics

Product ID: MADS-S67
Manufacturer: MADS Electronics
Smarty: S-67 & S-6710 for Dodge Cummins 6.7L Power Programmer
Smarty: S-67 & S-6710 for Dodge Cummins 6.7L Power Programmer

Smarty S-67 & S-6710 for Dodge Cummins Turbo-diesel 6.7L (2007 - 2012)

Fast guide to the S-67 Smarty’s special Features

  • CaTCHER software's inside

  • Ten different  performance levels

  • Fastest download in the industry, up to three times faster than the competition, a typical ECM update takes about 5 minutes

  • ABS tire height updates in just few seconds

  • Manual High Idle is enabled in all software

  • Reads  Diagnostic Trouble Codes in plain text

  • No tools required, no fuses to pull

  • USB built in for simple updates

  • Free internet updates

  • Most complete keyboard in the industry

  • Reliable, it works off your OEM hardware

  • Programmable Speed Limiter from 25 to 250 mph

  • Programmable parameters for fine tuning

  • "On the fly" Power on Demand under development

  • TNT software's under advanced development

*** Unlike the Smarty S06 for the 5.9L, the Smarty S67 is not untraceable

Fast guide to S-67 Smarty's software levelsFast guide to S-67 Smarty's software levels
The horsepower settings. except #0, all other software applications have a modified "Torque management" ( TQM). The throttle response is greatly improved but is set to a save limit. With "Save" they mean save your transmission and rest of the driveline.

  • SW # 0 : Half power

  • SW # 1 : 30 Hp increase, with added timing

  • SW # 2 : 60 Hp increase, no added timing ***

  • SW # 3 : 60 Hp increase, with added timing

  • SW # 4 : 90 Hp increase, no added timing ***

  • SW # 5 : 90 Hp increase, with added timing

  • SW # 6 : 130 Hp increase, no added timing ***

  • SW # 7 : 130 Hp increase, with added timing

  • SW # 8 : 170 Hp increase, no added timing *** °°°

  • SW # 9 : 170 Hp increase, with added timing °°°

°°° Do not use for prolonged high speed runs! Speeds exceeding approx 105 mph can result in high exhaust gas temperatures and damage the Diesel Particulate Filter (DPF) !!!
*** All even numbered software (2-4-6-8) without timing are to be used for stacking with other after market power adding devices that also add their own timing. NO additional timing has to be used with the odd numbered software (1-3-5-7-9). Severe engine damage will result !!!

Tested on stock trucks on the MAD Electronics in house Dyno Dynamics Twin Retarder Dyno. Stock means just that. Stock! Even the air filters were stock...

MADS Electronics checked the "baseline" ( the stock truck Hp at the rear wheels ) twice in a day in order to be sure about their findings. The above declared HP numbers are all rounded down to the closest number. For example the 90 Hp file actually did 96 Hp. That's a 90 Hp software for me, not a 100. The 170 Hp was 176.

Click to view larger image of the Smarty Case & KitABS / Speedo recalibration
The tire height can be adjusted up to 44" in increments of 10 tenth of an inch in just a couple seconds. Of course, Smarty needs to be VIN# locked to the truck in order to get into the ABS adjustment section.

DTC Code reader
The name says it all.
You can read and erase codes. Codes are displayed also in plain English. That's old news by now. Smarty S-03 was the first one to provide that utility, others found the idea to be a good one too.  
( Smarty does erase ABS codes too but does not display them )

ECM update speedSmarty S-67 for Dodge Cummins Turbo-diesel 6.7L (2007 - 2009)
Faster than anything else on the market! Again MAD Electronics has done their homework on the protocol. Less than 5 minutes. Three times faster than a Star-Scan diagnostic tool or competitor.

MADS Electronics has developed their own bootloader in order to not have to pull fuses should an update become interrupted for any reason. All you have to do is to turn the key off / key on Smarty does everything else on it's own.

The CaTCHER software as they are today are only a starting point. Expect major news in future. MADS Electronics is interested in your feedback, opinions, likes, dislikes...
MADS Electronics will make the Smarty do what YOU want, TOGETHER.



Price: $685.00

« Previous | Next »


Products Available at

2014 Chevy/GMC Duramax is tuned!  +81 HP & +170 ft/lb of torque!

Jeep Wrangler JK 3.6L 2012-2014 is now tuned!

Harley Davidson Tuner!
The Vigilante

Autoland Scientech
Diagnosis Online Solutions
Now Available!

Toyota Tundra Tuning!
Tacoma, Sequoia, & 4Runner
Up to 30 HP!

LC-1 Wideband Clearance Sale!  $147.50

2013 Dodge, Chrysler, & Jeep 3.6L, 5.7L & 6.4L Tuned!

Diablosport has tuned the 2014 Camaro SS!

Tuner Tools Facebook PageTuner Tools on TwitterTuner Tools on Linked In
Tuner Tools LLC
Contact Us

home - site map - search - brands - about us - contact - privacy - terms of service - cart

Tuner Tools Affiliates: Access your account here
Copyright 2006-2013 Tuner Tools LLC - All Rights Reserved Worldwide