Contact us at 888-OBD-TUNE (888-623-8863)    

Hours: Mon-Thur 9AM to 6PM, Fri 9AM-5PM, Sat/Sun by Appointment Only     

1958 East Walnut Street    
Unit D     
Columbus, Ohio 43205    

Email: Sales@tunertools.com
 
  Shop ServicesBrandsSearchContact UsAboutSite MapPrivacyTermsCheckout              


Dealer Inquiry (dealers ONLY please)





Home » Brand Line Card » Snow Performance

  Checkout
Product ID: Snow-201
Snow Gas Stage 1 Boost Cooler Forced Induction Water/Methanol Injection Kit
Snow Gas Stage 1 Boost Cooler Forced Induction Water/Methanol Injection Kit
Untitled 2

Overview


Race gas quality fuel on pump gas! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 1 Boost Cooler water-methanol injection kit is available for all forced induction applications (supercharged/turbocharged) and uses a adjustable boost switch to inject a fixed amount of water-methanol into the system until boost goes below the switch set point. Proven to deliver 30-70 HP increases to all forced induction applications! This makes it a good choice for low to medium boost setups (1-15 PSI) looking for an octane enhancement and cooler intake charge. Activation can also be set up through any other user-chosen switch, such as a full throttle switch, nitrous switch, etc.


Benefits:
  • Cooler Denser Air Charge
  • Achieve 116 Octane Quality Fuel From Pump Gas
  • Safely Run More Boost & Timing
  • Cleans Engine Combustion Of Carbon Build Up
  • Reduce Air Temperatures Greater and More Consistent Than Air to Air Intercooler
Features:
  • Made in USA
  • Nickel Plated Methanol Resistant Metal Fittings
  • Industry Leading 300 PSI Pump For More Pressure Than The Competition
  • Adjustable Boost Setting
  • Level Sensor Upgrade and Red LED to Alert User of Low Level
  • Green LED to Alert User When System is Injecting
  • Your Choice of Red, Blue, or Black Methanol Resistant High Temp Nylon Tubing
  • 2 Proprietary Hypersonic Nozzles For The Best Atomization on the Market
Whats In The Box:
  • 300 PSI UHO (Ultra High Output) Pump
  • 3 Quart Reservoir
  • All Tubing Necessary for Installation
    • 20'  1/4 Inch High Temp Nylon Tubing
    • 18" High Pressure Boost Line
  • Adjustable Boost Switch (1-15 PSI) 
  • Pig Tail Harness
  • Level Sensor Upgrade
  • 1 Nozzle Holder/Check Valve Combo
  • 2 Hyper-Sonic Nozzles
  • Required Hardware Needed For Installation
  • Snow Performance Running S Decal
  • Comprehensive Instructions to Install on Any Forced Induction Vehicle
  • Snow Performance 1-Year Warranty
How Does it Work?
The Stage 1 Boost Cooler injects a fixed amount of water-methanol into the intake tract of the vehicle once boost reaches a certain point (can be adjusted 1-15 PSI). This fixed amount is controlled by what size nozzle is installed in the system and can be changed to match your HP & boost levels. When this finally atomized mixture enters the engine it does the following.

Reduces Air Inlet Temperatures
The boost cooler does just that. Cools boost! When the atomized water evaporates it takes away massive amounts of heat (as much as 100 degrees) giving you the coldest densest air charge possible.

Increased Octane
Methanol is a slow burning high octane fuel. When mixed with water inside the combustion chamber it raises the effective octane of your fuel by 25 points when injecting a 50/50 mix of water/methanol. This means your 91 octane fuel now has the detonation control of 116 race gas! 

Cleans & Removes Carbon Build Up
Direct injected and emission equipped vehicles will gather carbon build up on the engine over time. This carbon build up can rob performance and decrease the longevity of your vehicle. Water-methanol injection steam cleans the engine of this carbon build up and prevents it from happening in the first place. 

Because you now have a colder denser air charge and high octane fuel you can now safely add boost/timing on your high performance vehicle for up to 20% HP gains!

Test Report: 
 

 
List Price: $378.94
Price: $359.99

 
« Previous | Next »


   

Products Available at www.TunerTools.com

2014 Chevy/GMC Duramax is tuned!  +81 HP & +170 ft/lb of torque!

Jeep Wrangler JK 3.6L 2012-2014 is now tuned!

Harley Davidson Tuner!
The Vigilante

Autoland Scientech
Diagnosis Online Solutions
"DOL"
Now Available!

Toyota Tundra Tuning!
Tacoma, Sequoia, & 4Runner
Up to 30 HP!

LC-1 Wideband Clearance Sale!  $147.50

2013 Dodge, Chrysler, & Jeep 3.6L, 5.7L & 6.4L Tuned!

Diablosport has tuned the 2014 Camaro SS!


Tuner Tools Facebook PageTuner Tools on TwitterTuner Tools on Linked In
Tuner Tools LLC
888 OBD TUNE
Contact Us

 

 

 

 

home - site map - search - brands - about us - contact - privacy - terms of service - cart

Tuner Tools Affiliates: Access your account here
Copyright 2006-2016 Tuner Tools LLC - All Rights Reserved Worldwide