Contact us at 888-OBD-TUNE (888-623-8863)    

Hours: Mon-Thur 9AM to 6PM, Fri 9AM-5PM, Sat/Sun by Appointment Only     

1958 East Walnut Street    
Unit D     
Columbus, Ohio 43205    

Email: Sales@tunertools.com
 
  Shop ServicesBrandsSearchContact UsAboutSite MapPrivacyTermsCheckout              


Dealer Inquiry (dealers ONLY please)





Home » Brand Line Card » Snow Performance

  Checkout
Product ID: Snow-210
Snow Gas Stage 2 Boost Cooler Forced Induction Water/Methanol Injection Kit
Snow Gas Stage 2 Boost Cooler Forced Induction Water/Methanol Injection Kit
Untitled 2

Unlock 50-70+HP on your boosted vehicle while decreasing your air temps by up to 100 degrees! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 2 Boost Cooler water-methanol injection system is available for all forced induction applications (supercharged/turbocharged). The Stage 2 uses a progressive controller that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. 

New for 2015, the Stage 2 introduces the VC-50 Controller. The VC-50 offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes directly on the screen. Also new, the VC-50 has the ability to progressively command 2 adjustable stages of water-methanol for maximum cooling and HP results.

Benefits:
  • Made In USA
  • Cooler Denser Air Charge
  • Achieve 116 Octane Quality Fuel From Pump Gas
  • Safely Run More Boost & Timing
  • Cleans Engine Combustion Of Carbon Build Up
  • Progressive Water-Methanol Injection
Features:
  • Nickel Plated Metal Fittings
  • Industry Leading 300 PSI UHO Pump For More Pressure Than The Competition
  • 52mm Boost Gauge and Adjustable Progressive Water-Methanol Controller All in One
  • 7 Color OLED Screen Displays Boost, Injection Percentage, Injection Error (s), Prime Button, Second Stage Activation, and Low Level
  • New Prime Feature Ensures Water-Methanol In Lines With Push of A Button
  • 2 Fault Modes (Clogged Line/Broken Line)
  • Level Switch Upgrade
  • Your Choice of Red, Blue, or Black Methanol Resistant High Temp Nylon Tubing
  • 2 Proprietary Hypersonic Nozzles For The Best Atomization On The Market
Whats In The Box:_
  • 300 PSI UHO (Ultra High Output) Pump
  • 3 Quart Reservoir
  • All Tubing Necessary for Installation
    • 20' 1/4 Inch High Temp Nylon Tubing
    • 18" High pressure Boost Line
  • Progressive VC-50 Controller
  • Pigtail Harness
  • Level Switch Upgrade
  • 1 Nozzle Holder/Check Valve Combo
  • 2 Hyper-Sonic Nozzles
  • Required Hardware Needed For Installation
  • Snow Performance Running S Decal
  • Comprehensive Instructions to Install on Any Forced Induction Vehicle
  • Snow Performance 1-Year Warranty

How Does it Work?
The Stage 2 Boost Cooler progressively commands injection based off of boost pressure (PSI). Start & full points are adjustable directly on the screen to match what the engine is producing. The VC-50 allows the user to see boost increase as well as injection take place at the desired boost levels. This is the preferred method of injection for turbos and centrifugal superchargers. When this finally atomized mixture enters the engine it does the following.

Reduces Air Inlet Temperatures
The boost cooler does just that. Cools boost! When the atomized water evaporates it takes away massive amounts of heat (as much as 100 degrees) giving you the coldest densest air charge possible.

Increased Octane
Methanol is a slow burning high octane fuel. When mixed with water inside the combustion chamber it raises the effective octane of your fuel by 25 points when injecting a 50/50 mix of water/methanol. This means your 91 octane fuel now has the detonation control of 116 race gas! 

Cleans & Removes Carbon Build Up
Direct injected and emission equipped vehicles will gather carbon build up on the engine over time. This carbon build up can rob performance and decrease the longevity of your vehicle. Water-methanol injection steam cleans the engine of this carbon build up and prevents it from happening in the first place. 

Because you now have a colder denser air charge and high octane fuel you can now safely add boost/timing on your high performance vehicle for up to 20% HP gains!

 

 
List Price: $589.46
Price: $559.99

 
« Previous | Next »


   

Products Available at www.TunerTools.com

2014 Chevy/GMC Duramax is tuned!  +81 HP & +170 ft/lb of torque!

Jeep Wrangler JK 3.6L 2012-2014 is now tuned!

Harley Davidson Tuner!
The Vigilante

Autoland Scientech
Diagnosis Online Solutions
"DOL"
Now Available!

Toyota Tundra Tuning!
Tacoma, Sequoia, & 4Runner
Up to 30 HP!

LC-1 Wideband Clearance Sale!  $147.50

2013 Dodge, Chrysler, & Jeep 3.6L, 5.7L & 6.4L Tuned!

Diablosport has tuned the 2014 Camaro SS!


Tuner Tools Facebook PageTuner Tools on TwitterTuner Tools on Linked In
Tuner Tools LLC
888 OBD TUNE
Contact Us

 

 

 

 

home - site map - search - brands - about us - contact - privacy - terms of service - cart

Tuner Tools Affiliates: Access your account here
Copyright 2006-2016 Tuner Tools LLC - All Rights Reserved Worldwide