Contact us at 888-OBD-TUNE (888-623-8863)    

Hours: Mon-Thur 9AM to 6PM, Fri 9AM-5PM, Sat/Sun by Appointment Only     

1958 East Walnut Street    
Unit D     
Columbus, Ohio 43205    

Email: Sales@tunertools.com
 
  Shop ServicesBrandsSearchContact UsAboutSite MapPrivacyTermsCheckout              


Dealer Inquiry (dealers ONLY please)





Home » StandaloneEcu

 Checkout
Select Price RangeKeyWord

« Previous | 1 | 2 | »

AEM EMS-4 Universal Programmable Engine Management System
Product ID: AEM-30-6905

Details 

AEM's EMS-4 Universal Standalone engine management system is designed for Powersports and 4-cylinder race vehicles. This affordable, lightweight, compact and powerful system features robust Series 2 EMS hardware in a weather and shock proof enclosure, with a 36-pin connector specifically designed to survive harsh racing environments. The EMS-4 has all of the features you need and nothing you don't (like AC, power locks, stereo, etc.) for dedicated 4-cylinder racecars, motorcycles, quads, side by sides or other race vehicles up to four cylinders.
:
List Price: $1,129.03
Price: $849.60

AEM Infinity-8 Stand-Alone Programmable Engine Management System
Product ID: AEM-30-7101

Details 

INFINITY OVERVIEW The Infinity ECU delivers state-of-the-art electronic fuel injection (EFI) control capabilities typically found only at upper echelons of Motorsports. However, we have now made this technology affordable for both professional race teams and amateur racers. Built around a latest-generation 200MHz automotive processor, the Infinity ECU is capable of processing 400 MIPS (millions of instructions per second) and is perhaps the fastest ECU available today. For a limited time, all Infinity ECU's come fully enabled, without the need for feature add-on purchases. Combined with AEM's industry leading after-purchase support system, including free technical support, the Infinity is the ultimate engine control solution for both professional race teams and weekend track cars.
:
List Price: $3,329.10
Price: $2,396.95

AEM Infinity-6h
Product ID: AEM-30-7106

Details 

INFINITY OVERVIEW The Infinity-6 and Infinity-8h ECUs deliver state-of-the-art electronic fuel injection (EFI) control capabilities typically found only at upper echelons of Motorsports. However, we have now made this technology affordable for both professional race teams and amateur racers. Built around a latest-generation 200MHz automotive processor, the Infinity ECU is capable of processing 400 MIPS (millions of instructions per second) and is perhaps the fastest ECU available today. For a limited time, all Infinity ECU's come fully enabled, without the need for feature add-on purchases. Combined with AEM's industry leading after-purchase support system, including free technical support, the Infinity is the ultimate engine control solution for both professional race teams and weekend track cars. THE I6/8h PLATFORM The Infinity-6 and Infinity-8h ECU is an affordable state-of-the-art engine control unit designed for four- and six-cylinder racing engines and racing engines with up to 8 cylinders that are using high-impedance injectors. Extensive research and development was put into designing the Infinity-6/8h to ensure that it delivers an unmatched price point for this level of engine control. Infinity-6 The Infinity-6 is designed for racing engines with up to 6 cylinders. It features a smaller footprint than the Infinity-8/10 (5.855" x 5.55" x 1.8") and a single, weatherproof 80-pin connector. View wiring harnesses and wiring options here: http://tunertools.com/AEM-wiring-plist.htm

:
:
List Price: $1,944.38
Price: $1,399.95

AEM Infinity-10 for 03-06 Nissan 350Z/Infiniti G35 M/T - CAN Enabled
Product ID: AEM-30-7107

Details 

The Infinity Plug & Play programmable ECU for the manual transmission 2003-'06 Nissan 350Z/Infiniti G35 (Infinity-8 PN 30-7110 and Infinity-10 PN 30-7107) includes an application-specific start-up calibration and connects via a Plug & Play harness (sold separately, PN 30-3520) that is designed to fit in the factory location (requires AEM bracket on G35 models, PN 30-5936). Begin by determining which Infinity ECU will best support the ancillary components in your manual transmission Nissan 350Z/G35 using the Infinity Specifications Chart (see "Specs" tab). The M/T 03-06 Nissan 350Z/G35 Plug & Play Infinity ECUs have unique part numbers and include several unique features that incorporate the Nissan factory electronics system (see "Features" tab). Complete Stand Alone Engine Control The Infinity ECU combines with the Plug & Play harness to replace the 350Z/G35's factory ECU. It controls all of the engine functions including up to four cam variable cam control (VQ35DE-RU) and the Drive by Wire (DBW) system. An AEM MAP sensor (sold separately) is required for proper operation of the Infinity ECU on this application. Plug & Play Harness with Expansion Port AEM's sealed, weatherproof Plug & Play harness (sold separately) includes dual Lambda connectors, an AEMnet connector for communication with other AEMnet enabled devices and an auxiliary connector with a Deutsch DTM 12P connector for adding common aftermarket sensors. Visit the "Features" tab for more information about the 350Z/G35 Infinity Plug & Play harness expansion port.
:
:
Price: $3,049.37

AEM Infinity-8h ECU
Product ID: AEM-30-7108

Details 

NFINITY OVERVIEW The Infinity-6 and Infinity-8h ECUs deliver state-of-the-art electronic fuel injection (EFI) control capabilities typically found only at upper echelons of Motorsports. However, we have now made this technology affordable for both professional race teams and amateur racers. Built around a latest-generation 200MHz automotive processor, the Infinity ECU is capable of processing 400 MIPS (millions of instructions per second) and is perhaps the fastest ECU available today. For a limited time, all Infinity ECU's come fully enabled, without the need for feature add-on purchases. Combined with AEM's industry leading after-purchase support system, including free technical support, the Infinity is the ultimate engine control solution for both professional race teams and weekend track cars. THE I6/8h PLATFORM The Infinity-6 and Infinity-8h ECU is an affordable state-of-the-art engine control unit designed for four- and six-cylinder racing engines and racing engines with up to 8 cylinders that are using high-impedance injectors. Extensive research and development was put into designing the Infinity-6/8h to ensure that it delivers an unmatched price point for this level of engine control. Infinity-6 The Infinity-6 is designed for racing engines with up to 6 cylinders. It features a smaller footprint than the Infinity-8/10 (5.855" x 5.55" x 1.8") and a single, weatherproof 80-pin connector. View wiring harnesses and wiring options here: http://tunertools.com/AEM-wiring-plist.htm
:
List Price: $1,792.36
Price: $1,399.95

Haltech Elite 1000  ECU Kit (Select Wiring Options)
Previous1 of 3Next
Product ID: HT-Elite-1000-15080x

Details 

Haltech Elite Series ECUs take the art of engine management to a brand new level. With a waterproof case, drive-by-wire, exhaust cam and knock control the Elite Series ECUs provide cutting edge technology to tuners and performance enthusiasts world-wide. Elite 1000 provides 4 independent injector and ignition outputs. This is simply an Elite 1500 without the Advanced Race Functions included. Includes Knock detection, boost control and more! No add-ins, all features enabled.
:
:
:
:
Price: $1,329.00

Haltech Elite 1500 ECU Kit (Select Wiring Options)
Previous1 of 3Next
Product ID: HT-Elite-1500-15090x

Details 

Haltech Elite Series ECUs take the art of engine management to a brand new level. With a waterproof case, drive-by-wire, exhaust cam and knock control the Elite Series ECUs provide cutting edge technology to tuners and performance enthusiasts world-wide. Elite 1500 provides 4 independent injector and ignition outputs. Includes Drive-by-wire support, Knock detection, boost control and more! No add-ins, all features enabled.
:
:
:
:
Price: $1,472.00

Haltech Elite 750 Miata Plug and Play Kit
Product ID: HT-Elite-150622-Miata_NA

Details 

Untitled 2

Haltech's Plug’n’Play Adaptor Harnesses allow you to use Haltech’s universal Elite ECUs by connecting them directly to the factory harness in your car via a Plug’n’Play adaptor. 
This is an ideal solution for builders and tuners who want a quick and easy install without the need to rewire the whole system.
Suits: Mazda MX-5 (Miata) 1.6L and 1.8L with 2 Plug, 2 Row ECU.
Suits: Mazda MX-5 (Miata) 1.6L and 1.8L with 2 Plug, 2 Row ECU.
Includes: Elite 750 ECU. Adaptor Harness. M14 x 1.5 Air Temp Sensor and plug and pins. Auxiliary I/O 16 Pin TYCO plug and pins.
Note: Does not support USDM OBDII MY96-97, Special Edition SE or Anniversary Models.

:
:
:
:
List Price: $1,800.00
Price: $1,519.00

Haltech Elite 2000 LS Terminated Harness Kit (Gen III LS engines)
Previous1 of 3Next
Product ID: HT-Elite-151260-LS_GenIII

Details 

Untitled 2

Simplify your LS install with Haltech's Terminated harness! Elite ECU and a plug and play harness ready to LS swap anything and everything!

LS Swap the world!

 Includes Elite 200 ECU and Terminated harness for Gen III based engines (LS1/LS6, 5.3/6.0 Vortec LM7/LQ4/LQ9) Ignition Coil and sub-harness no included.

:
:
:
Price: $2,275.00

Haltech Elite 2500 ECU Kit (Select Wiring Options)
Previous1 of 2Next
Product ID: HT-Elite-15130X

Details 

Haltech Elite Series ECUs take the art of engine management to a brand new level. With a waterproof case, drive-by-wire, exhaust cam and knock control the Elite Series ECUs provide cutting edge technology to tuners and performance enthusiasts world-wide. Elite 2500 provides 8 independent injector and ignition outputs for control on almost any engine!
:
:
:
:
Price: $1,947.00

Haltech Elite 2000 ECU Kit (Select Wiring Options)
Previous1 of 3Next
Product ID: HT-Elite-2000-15120x

Details 

Haltech Elite Series ECUs take the art of engine management to a brand new level. With a waterproof case, drive-by-wire, exhaust cam and knock control the Elite Series ECUs provide cutting edge technology to tuners and performance enthusiasts world-wide. Elite 1000 provides 4 independent injector and ignition outputs. This is simply an Elite 2500 without the Advanced Race Functions included. Includes Knock detection, boost control and more! No add-ins, all features enabled.
:
:
:
:
Price: $1,567.00

Haltech Elite 550 (SelectWiring Options)
Previous1 of 3Next
Product ID: HT-Elite-550-15040x

Details 

The Elite 550 is ideal for basic 4 to 8 cylinder or 1-2 rotor engine applications. This robust, competitively priced ECU features an environmentally sealed, waterproof case, 4 fuel and ignition channels and a 3 BAR internal MAP sensor.

The Elite 550 ECU is powered by the Elite Software Programmer (ESP) - a powerful yet intuitive software that brings with it levels of functionality and ease of use never seen before in an engine control package.

:
:
:
:
List Price: $849.00
Price: $807.00

Haltech Elite 750 (SelectWiring Options)
Product ID: HT-Elite-750-15060X

Details 

Untitled 2

The Elite 750 ECU is powered by the Elite Software Programmer (ESP) - a powerful yet intuitive software that brings with it levels of functionality and ease of use never seen before in an engine control package.

(Multiple wiring harness options availble - please select your options)

Engine Suitability:
- 1 to 8 cylinder engines or 1 to 3 rotor engines
- Normally aspirated or forced induction

:
:
:
:
List Price: $1,199.00
Price: $1,139.00

Link Atom G4+ ECU
Product ID: Link-Atom

Details 

The Atom now comes in a brand new enclosure, beautifully crafted from glass filled nylon. The stylish new enclosure is designed to IP67 standards, making it dust and waterproof. Running on the proven Link G4+ platform and being completely waterproof, Link are redefining what an entry level ECU should be. The Atom is ideal for naturally aspirated engines with 4 cylinders or less that just need a repower and don’t need all the extra sensors and features that come with our higher level ECUs. The same mounting technology as our higher level ECUsA fully extruded mounting plate is included Mounting hardware is completely hidden for a fully professional installation Waterproof automotive plugsThe same tuning features as our high-end ECUs - tuning is not compromised in this "entry level" ECU Full configurability, no preset input/outputsLogging, even closed loop fuel and knock if external devices are added (WideBand Controller & G4 KnockBlock)Industry standard waterproof connectors, mounting bracket and loom, all supplied with your G4 AtomSpec overview:Four injection drives, Four ignition outputs, Three analog inputs (you choose, oil pressure etc.)Two temperature inputs (usually water and inlet air temperature)Two digital inputs (e.g. vehicle speed and logging switch - you choose)Four auxiliary outputs (e.g. fuel pump, fans, boost control, O2 heater etc.) *One, thirty four pin, waterproof connector5V out
:
:
:
List Price: $815.45
Price: $699.00

Link Fury G4+ ECU
Product ID: Link-Fury

Details 

If it is Onboard Digital Wideband you are after, then the Fury is the ECU for you. Like the Xtreme, the Fury offers all the features you have come to expect from one of Link’s world leading premium ECU’s, but with Digital wideband. The Fury is optimised for engines with 6 cylinders or less and 3 Rotor engines. If you want to gain an advantage over the competition, you’ll want a premium ECU like the Fury.
:
:
:
:
List Price: $1,530.00
Price: $1,377.00

Link Monsoon G4+ ECU
Product ID: Link-Monsoon

Details 

If you like the value of the Atom, but are looking for a couple of extra features, then the Monsoon is the ECU for you. With the Monsoon you have all the repower capabilities of the Atom, but you can also choose to run some of the following features: Gearshift Control, Launch Control, Anti-lag, VVT Control and Closed Loop Boost Control. Note: The Monsoon will run any of the above features, but it cannot run them all at once. The amount of features you can run is dependent on how many of the limited Inputs and Outputs each feature needs. The Monsoon is ideal for engines with 4 cylinders or less that just need a repower and one or two features, so you don’t need to make the jump up to one of our higher level ECUs.
:
:
:
List Price: $875.00
Price: $875.00

Link MX5/Miata Plug and Play ECU
Product ID: Link-MX5Link

Details 

Free yourself from the constraints of the Factory ECU! The Link G4+ MX5Link MX5+ PlugIn fits the Mazda MX5 1600-1800 (NA models) and the GTX/R (1800cc). The ECU PCB fits discretely inside the original factory enclosure.
:
:
List Price: $815.45
Price: $720.00

Link G4+ PlugIn ECU Modules
Product ID: Link-PlugIn

Details 

Free yourself from the constraints of the factory ECU. The Link G4+ Plug-In fits discretely inside the original enclosure. Installation is a breeze with no alteration of the factory wiring loom required. A built-in connector (or pins in some models) provides additional inputs and outputs such as oil pressure inputs or anti-lag / logging switches (the number available depends on the application) Pricing Varies by application: SPECIAL ORDER ONLY!
:
:
:
List Price: $1,524.38
Price: $1,524.38

Link Storm G4+ ECU
Product ID: Link-Storm

Details 

If it is value for money you are after, the Storm is the ECU for you. The Storm offers most of the advanced G4+ tuning features, at an extremely competitive price. The Storm has more inputs (digital and analogue), as well as more outputs than the Atom, and runs more features like Knock Control, VVT Control, Launch Control and Anti-lag. The Storm is optimised for naturally aspirated engines with 6 cylinders or less that only need some of the extra sensors and features that come with our higher level ECUs. Hardware Four saturated injection drives, four ignition outputs, four analog volt inputs, four digital inputs, eight auxiliary outputs* Two temperature inputs One, thirty four pin, waterproof connector On board map, knock input (optional upgrade) CAN / RS232 port Software - PCLink Fast tuning with keyboard driven commands Six hundred pages of help on "right-click" Powerful logging analysis built into PCLink Tabbed, user configurable layout
:
:
:
:
List Price: $1,316.64
Price: $1,080.00

Link Thunder G4+ ECU
Product ID: Link-Thunder

Details 

G4+ THUNDER ECU The Thunder is our biggest, most advanced ECU yet. The Thunder is optimised for high end applications requiring maximum performance, flexibility and tuning control. The Thunder has more inputs, more outputs and more features than any other Link ECU. The Thunder isn’t just serious about performance, it’s obsessed.
:
:
:
:
List Price: $1,895.00
Price: $1,705.50

« Previous | 1 | 2 | »


   

Products Available at www.TunerTools.com

2014 Chevy/GMC Duramax is tuned!  +81 HP & +170 ft/lb of torque!

Jeep Wrangler JK 3.6L 2012-2014 is now tuned!

Harley Davidson Tuner!
The Vigilante

Autoland Scientech
Diagnosis Online Solutions
"DOL"
Now Available!

Toyota Tundra Tuning!
Tacoma, Sequoia, & 4Runner
Up to 30 HP!

LC-1 Wideband Clearance Sale!  $147.50

2013 Dodge, Chrysler, & Jeep 3.6L, 5.7L & 6.4L Tuned!

Diablosport has tuned the 2014 Camaro SS!


Tuner Tools Facebook PageTuner Tools on TwitterTuner Tools on Linked In
Tuner Tools LLC
888 OBD TUNE
Contact Us

 

 

 

 

home - site map - search - brands - about us - contact - privacy - terms of service - cart

Tuner Tools Affiliates: Access your account here
Copyright 2006-2016 Tuner Tools LLC - All Rights Reserved Worldwide