Now Available! The all new Tactrix OpenPort 2.0!
The OpenPort 2.0 is our newest tuning tool hardware that is capable
of communicating with a most OBDII compliant vehicles using a standard interface. Combined with our EcuFlash software, the OpenPort 2.0
is capable of reflashing a large number of newer Subaru and Mitsubishi
vehicles, and support for other cars is in progress. Micro
SD card is NOT included.
Adaptors/Initialization Connectors (included in this
set) are required for:
You can
download EcuFlash and the drivers for this product here
Download and/or purchase PCMSCAN OBD-II software here. (Note:
PCMSCAN sees the OpenPort as an SAE J2534 pass-thru device so you
use the J2534 setting in
PCMSCAN)
Other
software which works with the OpenPort 1.3 and 2.0 can be found here.
A
list of known vehicles supported by this cable and EcuFlash can be
found here.
Tactrix OpenPort 2.0 Technical Details
- 72Mhz 32-bit processor
- USB 2.0 full speed device
- Looks like a USB COM port to the operating system - no special
drivers needed
- Field upgradeable software
- Supports all major OBD protocols:
- CAN 2.0 (CAN/ISO15765)
- K-line (ISO9141/ISO14230(KWP2000)/dual K line)
- J1850 (PWM/VPW) W
- Standalone datalogs to microSD / microSDHC card without a laptop
- Able to apply GND or 8V-18V (5V-25V in a future
version) to OBD pins 1,3,9,11,12,13 or AUX 2.5mm stereo connector
- Able to log from Innovate Motorsports 2.5mm stereo data bus
- Using
PCMSCAN software under J2534 settings, will record and display
all global level OBD-II sensor data, PID information, Freeze Frame,
Readiness Monitor status and more (see
PCMSCAN page for details)
- Used with
PCMSCAN, can be used to merge and display OBD-II data with
Air/Fuel ratio data (via an auxiliary serial/usb port on the PC)
from any of the following AFR components:
- RGB status LEDs
IMPORTANT NOTES ON SOFTWARE FEATURES
Regarding the Tactrix OpenPort 2.0
The OpenPort 2.0 hardware has many features and capabilities, not
all of which have complete software support yet. We are providing this
product for sale now for customers who need the features which are
already working, or have use for the product until the new features
arrive. Here is a list of what works now, and what will work in the
future:
Working Now With The Tactrix OpenPort 2.0
- Reflash of ISO 9141 Subarus
- Reflash of CAN (ISO 15765) Subarus
- Reflash of Evo 5/6/7/8/9/10
- J2534 DLL
- CAN
- ISO 15765
- ISO 14230
- ISO 9141
NOT ENABLED - DEVELOPMENT IN PROGRESS
- J1850 (PWM/VPW)
- Logging to microSD
- EcuFlash logging software
- Mac/OSX support
|
