Contact us at 888-OBD-TUNE (888-623-8863)    

Hours: Mon-Thur 9AM to 6PM, Fri 9AM-5PM, Sat/Sun by Appointment Only     

1958 East Walnut Street    
Unit D     
Columbus, Ohio 43205    

Email: Sales@tunertools.com
 
  Shop ServicesBrandsSearchContact UsAboutSite MapPrivacyTermsCheckout              


Dealer Inquiry (dealers ONLY please)





Home » WMI

 Checkout
Select ManufactuerSelect Price RangeKeyWord

AEM: Water/Methanol Injection Filter
Product ID: AEM-30-3003
Manufacturer: AEM Performance Engineering

Details 

AEM Water / Methanol Inline Injection Filter
List Price: $38.79
Price: $28.49

AEM: V2 Water/Methanol Injection Kit w/ 1-Gallon Tank, p/n 30-3000
Product ID: AEM-30-3300
Manufacturer: AEM Performance Engineering

Details 

AEM V2 Water/Methanol Injection Kit (1 Gallon) The Version 2 AEM Water/Methanol Injection kit with 1 gallon tank includes all the elements necessary to do water/methanol injection right on nearly every forced induction gasoline vehicle. Imagine having the benefits of a super efficient intercooler and race gas-like detonation control but for hundreds of dollars less and all packaged in a complete kit. Run more boost and ignition timing to gain as much as 20% more horsepower while still using pump gas! Legal in California only for racing vehicles which may never be used upon a highway.
List Price: $555.34
Price: $459.00

AEM: Water/Methanol Injector Nozzle Kit
Product ID: AEM-30-3312
Manufacturer: AEM Performance Engineering

Details 

AEM Water / Methanol Injection Nozzle Kit **replacement parts only / not a full kit**
List Price: $94.26
Price: $67.87

AEM: Water/Methanol Injection 5-Gallon Tank, p/n 30-3010
Product ID: AEM-30-3320
Manufacturer: AEM Performance Engineering

Details 

This is p/n AEM 30-3010 - Water/Methanol Replacement 5-Gallon Tank. This replacement tank is by special order only and is not kept in stock. For the complete kits see 30-3000 or 30-3001
List Price: $209.25
Price: $150.66

AEM: Water/Methanol Injection 1- Gallon Replacement Tank
Product ID: AEM-30-3321
Manufacturer: AEM Performance Engineering

Details 

This is p/n AEM 30-3011 - Water/Methanol Replacement 1-Gallon Tank. This replacement tank is by special order only and is not kept in stock. For the complete injection kits see 30-3000 & 30-3001
List Price: $116.84
Price: $84.12

AEM: Water/Methanol Flow Gauge 0-500CC with Analog Face
Previous1 of 2Next
Product ID: AEM-30-5141
Manufacturer: AEM Performance Engineering

Details 

Water/Methanol Flow Gauge 0-500CC with Analog Face
List Price: $241.44
Price: $233.31

Water/Methanol Flow Gauge 0-1000CC with Analog Face
Product ID: AEM-30-5142
Manufacturer: AEM Performance Engineering

Details 

Water/Methanol Flow Gauge 0-1000CC with Analog Face
List Price: $317.69
Price: $228.74

Snow Gas Stage 1 Boost Cooler Forced Induction Water/Methanol Injection Kit
Product ID: Snow-201

Details 

Race gas quality fuel on pump gas! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 1 Boost Cooler water-methanol injection kit is available for all forced induction applications (supercharged/turbocharged) and uses a adjustable boost switch to inject a fixed amount of water-methanol into the system until boost goes below the switch set point. Proven to deliver 30-70 HP increases to all forced induction applications! This makes it a good choice for low to medium boost setups (1-15 PSI) looking for an octane enhancement and cooler intake charge. Activation can also be set up through any other user-chosen switch, such as a full throttle switch, nitrous switch, etc.
List Price: $378.94
Price: $359.99

Snow Gas Stage 2 Boost Cooler Forced Induction Water/Methanol Injection Kit
Product ID: Snow-210

Details 

Unlock 50-70+HP on your boosted vehicle while decreasing your air temps by up to 100 degrees! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 2 Boost Cooler water-methanol injection system is available for all forced induction applications (supercharged/turbocharged). The Stage 2 uses a progressive controller that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability.
List Price: $589.46
Price: $559.99

Snow Performance Stage II GM MAF Boost Cooler Water/Methanol Injection Kit
Product ID: Snow-212

Details 

The Snow Performance Stage 2 MAF/MAP water-methanol injection system is designed for all naturally aspirated/forced induction vehicles utilizing a Mass Air Flow (MAF) sensor or Manifold Absolute Pressure (MAP) sensor. The Stage 2 uses a progressive controller that proportionally injects more or less water-methanol according to MAF/MAP output. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to MAF/MAP sensor input gives an accurate delivery of water-methanol for small fast spooling turbos and positive displacement superchargers that hit boost almost instantly and allows the most accurate injection curve which translates into the highest cooling and performance gains. Proven to deliver 20-35 HP and 45 FTLB of torque on all naturally aspirated applications and 50-80 HP increases and up to 100 degree drop in air temps for all positive displacement superchargers and small fast spooling turbos! The Stage 2 comes with a MAFU controller that can be mounted any where in the engine bay or cab for a clean install and comes with the industry leading Snow Performance 300 PSI UHO pump and Hypersonic Nozzles for the absolute best atomization and power available for your vehicle.
List Price: $526.31
Price: $499.99

Snow Performance Stage 3 Gasoline The New Boost Cooler Water/Methanol Injection Kit
Product ID: Snow-310

Details 

The Snow Performance Stage 3 Boost Cooler is the most advanced water-methanol injection system for your EFI (electronic fuel injected) and forced induction (turbocharged/supercharged) vehicle. The Stage 3 creates a 2D injection map based off boost and fuel injector pulse width to deliver the most accurate and tunable water-meth delivery on the market. Taking it one step further the Stage 3 Boost Cooler water-methanol injection kit will control 2 Hyper-Sonic Nozzles independently of one another to solidly the exact amount of water-methanol is provided at all rpm ranges of the engine. This 2D map injection and dual stage technology translates into the most accurate injection curve and tuneability of any water-methanol system giving 50-110 HP gains and up to 150 degree reduction in air temps! Tie this in with the industry leading Snow Performance 300 PSI UHO pump, Hypersonic Nozzles, and the Stage 3 promises to be the easiest and most effective water-methanol system on the market for your EFI and boosted vehicle.
List Price: $894.73
Price: $849.99

Snow Performance Gasoline Stage 3 DI/Ecoboost The New Boost Cooler Water/Methanol Injection Kit
Product ID: Snow-320

Details 

The Snow Performance Stage 3 Boost Cooler is the most advanced water-methanol injection system for your EFI (electronic fuel injected) and forced induction (turbocharged/supercharged) vehicle. The Stage 3 creates a 2D injection map based off boost and fuel injector pulse width to deliver the most accurate and tunable water-meth delivery on the market. Taking it one step further the Stage 3 Boost Cooler water-methanol injection kit will control 2 Hyper-Sonic Nozzles independently of one another to solidly the exact amount of water-methanol is provided at all rpm ranges of the engine. This 2D map injection and dual stage technology translates into the most accurate injection curve and tuneability of any water-methanol system giving 50-110 HP gains and up to 150 degree reduction in air temps! Tie this in with the industry leading Snow Performance 300 PSI UHO pump, Hypersonic Nozzles, and the Stage 3 promises to be the easiest and most effective water-methanol system on the market for your EFI and boosted vehicle.
List Price: $894.73
Price: $849.99

Snow Performance Solenoid Upgrade
Product ID: Snow-40060

Details 

The new and improved Snow Performance Solenoid Upgrade offers 100% safety for all injection systems utilizing a rear mounted reservoir, injection points under vacuum, or installs where injection nozzle is lower than water-methanol reservoir. The solenoid fits in line between the pump and injection point and locks fluid in place when not in use adding safety and peace of mind to any injection system. Can also be used to control a second stage of injection with any VC-50, Stage 3, or MPG-MAX water-meth controller.
List Price: $63.15
Price: $59.99



   

Products Available at www.TunerTools.com

2014 Chevy/GMC Duramax is tuned!  +81 HP & +170 ft/lb of torque!

Jeep Wrangler JK 3.6L 2012-2014 is now tuned!

Harley Davidson Tuner!
The Vigilante

Autoland Scientech
Diagnosis Online Solutions
"DOL"
Now Available!

Toyota Tundra Tuning!
Tacoma, Sequoia, & 4Runner
Up to 30 HP!

LC-1 Wideband Clearance Sale!  $147.50

2013 Dodge, Chrysler, & Jeep 3.6L, 5.7L & 6.4L Tuned!

Diablosport has tuned the 2014 Camaro SS!


Tuner Tools Facebook PageTuner Tools on TwitterTuner Tools on Linked In
Tuner Tools LLC
888 OBD TUNE
Contact Us

 

 

 

 

home - site map - search - brands - about us - contact - privacy - terms of service - cart

Tuner Tools Affiliates: Access your account here
Copyright 2006-2016 Tuner Tools LLC - All Rights Reserved Worldwide