Shipping calculated at checkout (free standard shipping to US addresses!*) (Limitations apply)
A wide range of data sources
MXS 1.2 Strada, the evolution ofMXS Strada, is a 5" color display with great visual impact, configurable to show lap times and all the info coming from the Engine Control Unit, analog/digital inputs, pre-defined math channels and - optionally - theGPS08 Module.
There are 2 options: Street, and RACE - Street has preconfigured lights/icons for turn signals, headlights, etc. If you want flexible warning lights without the street functions/icons select the RACE version.
Watch your data in pre-configured pages
MXS 1.2 Strada shows, together with RPM scale, all the data you need, like speed, water temperature and oil pressure, laptimes and much more...
You can choose the custom pages you wish among a wide library of page styles, defining which data to be shown, their end of scale and measure units. Swapping between pages is quite easy using the pushbuttons.
High contrast TFT display
MXS 1.2 Strada features a high contrastTFT display: its visual quality is always optimal as its ambient light sensor keeps the backlight at the best brightness levels.
The dash is of course available also in the "Street Icons" version(fuel, oil, water temp., etc.)
The ten multicolored RGB shift lights can be customized as you like, defining the RPM threshold for each single gear.
The same flexibility applies to the configurable RGB alarm LEDs: you can configure them in order to turn them on/off depending on analog or digital inputs, ECU values, expansion values, math channels or - optionally - GPS information.
You choose conditions and colors: select a solid alarm or flashing one - and the flashing frequency.
It is also possible to configure an accompanying text message, and set the alarm priorities.
Two digital outputs
MXS 1.2 Strada features a LOW SIDE type(switch to ground) digital output configurablein order to be activated/deactivated dependingon the value of the analog/digital inputsor on impulses coming from the ECU.
This permits to automatically run externalsystems, i.e. to switch on/off additionallights, to activate/de-activate a coolingfan or circulation pumps, etc. when a certainevent happens.
Camera inputs,also for mirror camera
Two analog camera inputs are available, to swap your display into a mirror camera, through pushbutton command or event management.