Smarty S-06 with Power On Demand for Dodge Cummins Turbodiesel 5.9L (2003-2007)
Fast guide to Smarty’s special Features
-
CaTCHER software's inside
-
Ten different performance levels.
-
Fastest download in the industry, up to three times faster than the
competition, a typical ECM update takes about 3.5 to 5 minutes,
depending on the truck model.
-
ABS tire height updates in just few seconds.
-
Not traceable in the stock setting. Smarty leaves no footprint.
-
Manual High Idle is enabled in all softwares
-
Reads Diagnostic Trouble Codes in plain text.
-
No tools required, no fuses to pull.
-
USB built in for simple updates .
-
Most complete keyboard in the industry.
-
Reliable, it works off your OEM hardware.
-
Programmable Speed Limiter from 25 to 250 mph
- Power on Demand
modified "Torque management" ( TQM ). The throttle response is
greatly improved but is set to a safe limit. With "Safe" I mean safe for
your tranny and rest of the driveline.
-
SW # 0 : Half power
-
SW # 1 : 30 hp increase, with added timing .
-
SW # 2 : 60 hp increase, no added timing.
-
SW # 3 : 60 hp increase, with added timing.
-
SW # 4 : 90 hp increase, no added timing.
-
SW # 5 : 90 hp increase, with added timing.
-
SW # 6 : 160 hp increase, no added timing.
-
SW # 7 : 160 hp increase, with added timing.
-
SW # 8 : 210 hp increase, no added timing.
-
SW # 9 : 210 hp increase, with added timing.
Stock means just that. Stock! Even the air filters were stock...
The trucks were S T O C K, even the wastegate settings!
We checked the "baseline" ( the stock truck hp at the rear wheels )
twice in a day in order to be sure about our findings. The above
declared hp numbers are all rounded down to the closest number. For
example the 90 hp file actually did 96 hp. That's a 90 hp software for
me, not a 100. The 210 hp was 215.
100 power levels selectable in just one second during the driving!
It's easy: just type the preferred power level directly on Smarty
keyboard, from 00 to 99. That's all!
For security reason, the truck waits that the throttle is released before
applying the new power level.
I herby CLAIM that SmartyCR is the FIRST AND ONLY downloader
that does not erase any of the stored data in the ECM. Smarty does
NOT leave any electronic footprints in the ECM or any other electronic
module in the truck. Smarty does NOT set ANY codes once the ECM is
set back to stock. Smarty does NOT need to have fuses pulled.
No matter what the competition claims , in one way or another they're
ALL detectable.
Smarty is NOT!
Yet, Smarty can not do one thing for you. Fix what others have
broken. Smarty can not restore a key on counter that another
downloader has erased . Smarty can not fix VIN# troubles caused by
other products. If your Check engine / ABS light is on because another
product has screwed your ECM, Smarty can not fix it, the other guy
HAS to...
ABS / Speedo recalibration
The tire height can be adjusted up to 44" in increments of 10 tenth of
an inch in just a couple seconds. Of course, Smarty needs to be VIN#
locked to the truck in order to get into the ABS adjustment section.
DTC Code reader
The name says it all.
You can read and erase codes. Codes are displayed also in plain
English. That's old news by now. Smarty S-03 was the first one to
provide that utility, others found the idea to be a good one too.
( Smarty does erase ABS codes too but does not display them )
ECM update speed
Faster than anything else on the market! Again we've done our
homework on the protocol. Less than 5 minutes. Three times faster
than a Star-Scan diagnostic tool or competitor.
We have developed our own bootloader in order to not have to pull
fuses should an update become interrupted for any reason. All you
have to do is to turn the key off / key on Smarty does everything else
on it's own.
Updates
The CaTCHER softwares as they are today are only a starting point.
Expect major news in future. We’re for your feedback, opinions, likes,
dislikes...
We will make Smarty do what YOU want, TOGETHER.