Link G4 Knock Block

  • Sale
  • Regular price $490.00
Shipping calculated at checkout (free standard shipping to US addresses!*) (Limitations apply)


Link KnockBlock G4+ Pro Knock Detection Equipment

The easy way to detect engine knock

The G4+ KnockBlock is an essential tool for tuning and can aid in the early detection of incorrect timing, lean air/fuel mixtures and mechanical issues.

Features

  • Listen to one or two knock sensors
  • Special filtering design improves signal to noise ratio
  • Can be used with ear buds, ear phones and noise cancelling ear muffs
  • Long life lithium rechargeable battery
  • Rugged CNC aluminium enclosure
  • Flying lead headphones connector
  • Can be used with all OEM knock sensors
  • Can be used to interface directly to a laptop for recording of engine noise or knock sensor frequency analysis (using PCLink G4+)
  • Included parts and Specifications:

    Operating

  • Install the knock sensor/s in a suitable location on the engine (typically on a solid mounting point on the block near the cylinder head)
  • If only using one sensor, leave the unused sensor cable disconnected
  • Turn the volume control clockwise until it clicks. The LED indicator will turn blue when the KnockBlock is operating
  • Turn the volume to the minimum setting (most anti-clockwise)
  • Connect headphones to the 3.5mm audio jack
  • Run the engine and carefully increase the volume (clockwise) until engine mechanical noise can be heard. Adjust to a comfortable listening volume

    Charging

  • Turn off the KnockBlock by turning the volume control anti-clockwise until it clicks
  • Connect the USB charging cable to the KnockBlock's Mini USB connector. Can be charged from any standard USB charger PC, laptop, car or cell phone charger (2.1A at 5V max)
  • The LED indicator will show red while charging. When the indicator turns off the battery is fully charged
  • Charge the G4+ KnockBlock after use and before storage

     

  • What Is In The Box?

  • G4+ KnockBlock
    1. 2 sensor looms (attached)
    2. 1 headphone loom (attached)
  • Quick Start Guide
  • 1 USB cable mini
  • 2 Bosch type doughnut OEM knock sensors
  • 2 small Link Engine Management stickers- See more at: http://dealers.linkecu.com/G4PlusKnockBlock#sthash.6N87QbDz.dpuf
  •  

    Knock Sound Recordings

    Knock sound recordings demonstrate what you would hear when using Knock Ears

    The following sound recordings were sampled at various RPM at first with correct timing, which does not produce knock; then timing was advanced to induce knock, and finally timing was reduced to eliminate knock:

    The following sound recordings were sampled at various RPM to demonstrate heavy knock:

    Please note, the following sounds are in Microsoft's WMA format which can be played through Windows Media Player and other audio players with WMA support.